So I recently saw it the first time in the wild, I liked that you get
interactively asked about the nix.conf settings from the flake, but
there were a few minor things that I'd like to see changed:
* The `(y/N)` was somewhere in the middle of the line. Moved it to
the end. At first I assumed it was a bug because another thread into
my terminal while I was answering the question.
* I had to say no four times for a single flake with two options. So if
you already know you don't want any of the config for _this_ flake, I
found a `No to all` switch that ignores the rest of the nix.conf
settings a little more ergonomic than having to stop the invocation,
looking up the exact wording of `--no-accept-flake-config` and
restarting it. Hence, I added it.
* Added a note where the choices which settings to trust are persisted.
My initial assumption was that this went into `nix.conf` which is not
writable on NixOS, so I said no there as well.
Change-Id: I0a0d9c403f0662df4707697a77f08e6cd003ec6f
* changes:
treewide: make more settings conditionally available
libstore/build: only send overridden settings to the build hook
treewide: consistently mark overridden settings as such
The old behavior results in lots of concatenations happening for no good
reason and is an artifact of the technical limitations of the old parser
(combined with some lack of care for such details).
Change-Id: I0d78d6220ca6aeaa10bc437e48e08bf7922e0bb3
This is only a minor semantical distinction, but we should be able to
properly test it, and the parser tests rely on show for that.
Change-Id: I25e868cf9544e30cdff17deb5fd50a434e0f367e
This commit should faithfully reproduce the old behavior down to the
bugs. The new code is a lot more readable, all quirks are well
documented, and it is overall much more maintainable.
Change-Id: I629585918e4f2b7d296b6b8330235cdc90b7bade
Only overridden settings are sent to the daemon, and we're going to do the same
for the build hook to. It needs to be ensured that overridden settings are in
fact consistently marked as such, so that they actually get sent.
Change-Id: I7cd58d925702f86cf2c35ad121eb191ceb62a355
I followed @pennae's advice and moved the constructor definition of
`AttrName` from the header file `nixexpr.hh` to `nixexpr.cc`.
Change-Id: I733f56c25635b366b11ba332ccec38dd7444e793
The approach that was taken here was to add default values to the type
definitions rather than specify them whenever they are missing.
Now the only remaining warning is '-Wunused-parameter' which @jade said
is usually counterproductive and that we can just disable it:
https://git.lix.systems/lix-project/lix/issues/456#issuecomment-6617
So this change adds the flags '-Wall', '-Wextra' and
'-Wno-unused-parameter', so that all warnings are enabled except for
'-Wunused-parameter'.
Change-Id: Ic223a964d67ab429e8da804c0721ba5e25d53012
This splits `ignoreException` into `ignoreExceptionExceptInterrupt`
(which ignores all exceptions except `Interrupt`, which indicates a
SIGINT/CTRL-C) and `ignoreExceptionInDestructor` (which ignores all
exceptions, so that destructors do not throw exceptions).
This prevents many cases where Nix ignores CTRL-C entirely.
See: https://github.com/NixOS/nix/issues/7245
Upstream-PR: https://github.com/NixOS/nix/pull/11618
Change-Id: Ie7d2467eedbe840d1b9fa2e88a4e88e4ab26a87b
Since fb38459d6e, each `ref` is appended
with `refs/heads` unless it starts with `refs/` already. This regressed
two use-cases that worked fine before:
* Specifying a commit hash as `ref`: now, if `ref` looks like a commit
hash it will be directly passed to `git fetch`.
* Specifying a tag without `refs/tags` as prefix: now, the fetcher prepends
`refs/*` to a ref that doesn't start with `refs/` and doesn't look
like a commit hash. That way, both a branch and a tag specified in
`ref` can be fetched.
The order of preference in git is
* file in `refs/` (e.g. `HEAD`)
* file in `refs/tags/`
* file in `refs/heads` (i.e. a branch)
After fetching `refs/*`, ref is resolved the same way as git does.
Change-Id: Idd49b97cbdc8c6fdc8faa5a48bef3dec25e4ccc3
This is the repl overlay from my dotfiles, which I think provides a
reasonable and ergonomic set of variables. We can iterate on this over
time, or (perhaps?) provide a sentinel value like `repl-overlays =
<DEFAULT>` to include a "suggested default" overlay like this one.
Change-Id: I8eba3934c50fbac8367111103e66c7375b8d134e
Fixes:
- Identifiers starting with _ are prohibited
- Some driveby header dependency cleaning which wound up with doing some
extra fixups.
- Fucking C style casts, man. C++ made these 1000% worse by letting you
also do memory corruption with them with references.
- Remove casts to Expr * where ExprBlackHole is an incomplete type by
introducing an explicitly-cast eBlackHoleAddr as Expr *.
- An incredibly illegal cast of the text bytes of the StorePath hash
into a size_t directly. You can't DO THAT.
Replaced with actually parsing the hash so we get 100% of the bits
being entropy, then memcpying the start of the hash. If this shows
up in a profile we should just make the hash parser faster with a
lookup table or something sensible like that.
- This horrendous bit of UB which I thankfully slapped a deprecation
warning on, built, and it didn't trigger anywhere so it was dead
code and I just deleted it. But holy crap you *cannot* do that.
inline void mkString(const Symbol & s)
{
mkString(((const std::string &) s).c_str());
}
- Some wrong lints. Lots of wrong macro lints, one wrong
suspicious-sizeof lint triggered by the template being instantiated
with only pointers, but the calculation being correct for both
pointers and not-pointers.
- Exceptions in destructors strike again. I tried to catch the
exceptions that might actually happen rather than all the exceptions
imaginable. We can let the runtime hard-kill it on other exceptions
imo.
Change-Id: I71761620846cba64d66ee7ca231b20c061e69710
There have been multiple setting types for paths that are supposed to be
canonicalised, depending on whether zero or one, one, or any number of paths is
to be specified. Naturally, they behaved in slightly different ways in the
code. Simplify things by unifying them and removing special behaviour (mainly
the "multiple paths type can coerce to boolean" thing).
Change-Id: I7c1ce95e9c8e1829a866fb37d679e167811e9705
Closes#460
I managed to trigger the issue by having the following inputs (shortened):
authentik-nix.url = "github:nix-community/authentik-nix";
authentik-nix.inputs.poetry2nix.inputs.nixpkgs.follows = "nixpkgs";
When evaluating this using
nix-eval-jobs --flake .#hydraJobs
I got the following error:
error: cannot update unlocked flake input 'authentik-nix/poetry2nix' in pure mode
The issue we have here is that `authentik-nix/poetry2nix` was written
into the `overrideMap` which caused Nix to assume it's a new input and
tried to refetch it (#460) or errored out in pure mode
(nix-eval-jobs / Hydra).
The testcase unfortunately only involves checking for the output log
and makes sure that something *is* logged on the first fetch so that
the test doesn't rot when the logging changes since I didn't
manage to trigger the error above with the reproducer from #460. In
fact, I only managed to trigger the `cannot update unlocked flake input`
error in this context with `nix-eval-jobs`.
Change-Id: Ifd00091eec9a0067ed4bb3e5765a15d027328807
They are like experimental features, but opt-in instead of opt-out. They
will allow us to gracefully remove language features. See #437
Change-Id: I9ca04cc48e6926750c4d622c2b229b25cc142c42
* changes:
sqlite: add a Use::fromStrNullable
util: implement charptr_cast
tree-wide: fix a pile of lints
refactor: make HashType and Base enum classes for type safety
build: integrate clang-tidy into CI
This:
- Converts a bunch of C style casts into C++ casts.
- Removes some very silly pointer subtraction code (which is no more or
less busted on i686 than it began)
- Fixes some "technically UB" that never had to be UB in the first
place.
- Makes finally follow the noexcept status of the inner function. Maybe
in the future we should ban the function from not being noexcept, but
that is not today.
- Makes various locally-used exceptions inherit from std::exception.
Change-Id: I22e66972602604989b5e494fd940b93e0e6e9297
The |> operator is a reverse function operator with low binding strength
to replace lib.pipe. Implements RFC 148, see the RFC text for more
details. Closes#438.
Change-Id: I21df66e8014e0d4dd9753dd038560a2b0b7fd805
Currently, the parser relies on the global experimental feature flags.
In order to properly test conditional language features, we instead need
to pass it around in the parser::State.
This means that the parser cannot cache the result of isEnabled anymore,
which wouldn't necessarily hurt performance if the function didn't
perform a linear search on the list of enabled features on every single
call. While we could simply evaluate once at the start of parsing and
cache the result in the parser state, the more sustainable solution
would be to fix `isEnabled` such that all callers may profit from the
performance improvement.
Change-Id: Ic9b9c5d882b6270e1114988b63e6064d36c25cf2
Expose an option for disabling the BDW-GC build dependency entirely. Fix the
place where one of its headers was included (unnecessarily) without proper
guarding. Finally, use this machinery to exclude BDW-GC from the ASAN builds
entirely (its usage has already been disabled due to compatibility issues
anyway), to ensure this configuration is not regressed again.
Change-Id: I2ebe8094abf67e7d1e99eed971de3e99d071c10b
The original attempt at this introduced a regression; this commit
reverts the revert and fixes the regression.
This reverts commit 3e151d4d77.
Fix to the regression:
flakeref: fix handling of `?dir=` param for flakes in subdirs
As reported in #419[1], accessing a flake in a subdir of a Git
repository fails with the previous commit[2] applied with the error
error: unsupported Git input attribute 'dir'
The problem is that the `dir`-param is inserted into the parsed URL if a
flake is fetched from the subdir of a Git repository. However, for the
fetching part this isn't even needed. The fix is to just pass `subdir`
as second argument to `FlakeRef` (which needs a `basedir` that can be
empty) and leave the parsedURL as-is.
Added a regression test to make sure we don't run into this again.
[1] https://git.lix.systems/lix-project/lix/issues/419
[2] e22172aaf6b6a366cecd3c025590e68fa2b91bcc,
originally 3e151d4d77
Change-Id: I2c72d5a32e406a7ca308e271730bd0af01c5d18b
* changes:
remove unused headers in installable-attr-path
libexpr: include the type of the non-derivation value in the type error
libexpr: mild cleanup to getDerivations
libexpr: DrvInfo: remove unused bad-citizen constructor
cleanup and slightly refactor DrvInfo::queryOutputs
Shuffled the logic around a bit so the shorter code paths are early
returns, added comments, etc.
Should be NFC.
Change-Id: Ie3ddb3d0eddd614d6f8c37bf9a4d5a50282084ea
DrvInfo's constructor that only takes `EvalState` leaves everything else
empty; a DrvInfo which has no iota of information about the derivation
it represents is not useful, and was not used anywhere.
Change-Id: Ic4d93a08cb2748b8cef9a61e41e70404834b23f9
*accidentally* overriding a function is almost guaranteed to be an
error. overriding a function without labeling it as such is merely
bad style, but bad style that makes the code harder to understand.
Change-Id: Ic0594f3d1604ab6b3c1a75cb5facc246effe45f0
This commit adds a new helper template function to gc-alloc.hh (which is
probably where you want to look at first, O great reviewer [custom file
ordering in review diffs when]), which uses a type argument to determine
the size to allocate, rather than making the caller use sizeof().
Change-Id: Ib5d138d91a28bdda304a80db24ea9fb08669ad22
The purpose of this function has little to do with immutability. Value's
strings are never mutated, and the point of this function is to
singleton empty strings.
Change-Id: Ifd41dd952409d54e4d3de9ab59064e6928b0e480
* changes:
Fixup a bunch of references to nixos.org manuals
Add release notes for removing overflow from Nix language
expr: fix a compiler warning about different signs in comparison
