The original attempt at this introduced a regression; this commit
reverts the revert and fixes the regression.
This reverts commit 3e151d4d77.
Fix to the regression:
flakeref: fix handling of `?dir=` param for flakes in subdirs
As reported in #419[1], accessing a flake in a subdir of a Git
repository fails with the previous commit[2] applied with the error
error: unsupported Git input attribute 'dir'
The problem is that the `dir`-param is inserted into the parsed URL if a
flake is fetched from the subdir of a Git repository. However, for the
fetching part this isn't even needed. The fix is to just pass `subdir`
as second argument to `FlakeRef` (which needs a `basedir` that can be
empty) and leave the parsedURL as-is.
Added a regression test to make sure we don't run into this again.
[1] https://git.lix.systems/lix-project/lix/issues/419
[2] e22172aaf6b6a366cecd3c025590e68fa2b91bcc,
originally 3e151d4d77
Change-Id: I2c72d5a32e406a7ca308e271730bd0af01c5d18b
this much more closely mimics what is actually happening: we're reading
data from somewhere else, actively, rather than passively waiting. with
the data flow matching the underlying system interactions better we can
remove a few sinkToSource calls that merely exists to undo the mismatch
caused by not treating subprocess output as a data source to begin with
Change-Id: If4abfc2f8398fb5e88c9b91a8bdefd5504bb2d11
this will let us also return a source for the program output later,
which will in turn make sinkToSource unnecessary for program output
processing. this may also reopen a path for provigin program input,
but that still needs a proper async io framework to avoid problems.
Change-Id: Iaf93f47db99c38cfaf134bd60ed6a804d7ddf688
Previously, the progress bar had two subtly different states in which the bar
would not actually render, both with their own shortcomings: inactive (which
was irreversible) and paused (reversible, but swallowing logs). Furthermore,
there was no way of resetting the statistics, so a very bad solution was
implemented (243c0f18da) that would create a new
logger for each line of the repl, leaking the previous one and discarding the
value of printBuildLogs. Finally, if stderr was not attached to a TTY, the
update thread was started even though the logger was not active, violating the
invariant required by the destructor (which is not observed because the logger
is leaked).
In this commit, the two aforementioned states are unified into a single one,
which can be exited again, correctly upholds the invariant that the update
thread is only running while the progress bar is active, and does not swallow
logs. The latter change in behavior is not expected to be a problems in the
rare cases where the paused state was used before, since other loggers (like
the simple one) don't exhibit it anyway. The startProgressBar/stopProgressBar
API is removed due to being a footgun, and a new method for properly resetting
the progress is added.
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Change-Id: I2b7c3eb17d439cd0c16f7b896cfb61239ac7ff3a
This reverts commit 35eec921af.
Reason for revert: Regressed nix-eval-jobs, and it appears to be this change is buggy/missing a case. It just needs another pass.
Code causing the problem in n-e-j, when invoked with `nix-eval-jobs --flake '.#hydraJobs'`:
```
n-e-j/tests/assets » ../../build/src/nix-eval-jobs --meta --workers 1 --flake .#hydraJobs
warning: unknown setting 'trusted-users'
warning: `--gc-roots-dir' not specified
error: unsupported Git input attribute 'dir'
error: worker error: error: unsupported Git input attribute 'dir'
```
```
nix::Value *vRoot = [&]() {
if (args.flake) {
auto [flakeRef, fragment, outputSpec] =
nix::parseFlakeRefWithFragmentAndExtendedOutputsSpec(
args.releaseExpr, nix::absPath("."));
nix::InstallableFlake flake{
{}, state, std::move(flakeRef), fragment, outputSpec,
{}, {}, args.lockFlags};
return flake.toValue(*state).first;
} else {
return releaseExprTopLevelValue(*state, autoArgs, args);
}
}();
```
Inspecting the program behaviour reveals that `dir` was in fact set in the URL going into the fetcher. This is in turn because unlike in the case changed in this commit, it was not erased before handing it to libfetchers, which is probably just a mistake.
```
(rr) up
3 0x00007ffff60262ae in nix::fetchers::Input::fromURL (url=..., requireTree=requireTree@entry=true) at src/libfetchers/fetchers.cc:39
warning: Source file is more recent than executable.
39 auto res = inputScheme->inputFromURL(url, requireTree);
(rr) p url
$1 = (const nix::ParsedURL &) @0x7fffdc874190: {url = "git+file:///home/jade/lix/nix-eval-jobs",
base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file", authority = std::optional<std::string> = {[contained value] = ""},
path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {["dir"] = "tests/assets"}, fragment = ""}
(rr) up
4 0x00007ffff789d904 in nix::parseFlakeRefWithFragment (url=".#hydraJobs", baseDir=std::optional<std::string> = {...},
allowMissing=allowMissing@entry=false, isFlake=isFlake@entry=true) at src/libexpr/flake/flakeref.cc:179
warning: Source file is more recent than executable.
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
(rr) p parsedURL
$2 = {url = "git+file:///home/jade/lix/nix-eval-jobs", base = "git+file:///home/jade/lix/nix-eval-jobs", scheme = "git+file",
authority = std::optional<std::string> = {[contained value] = ""}, path = "/home/jade/lix/nix-eval-jobs", query = std::map with 1 element = {
["dir"] = "tests/assets"}, fragment = ""}
(rr) list
174
175 if (pathExists(flakeRoot + "/.git/shallow"))
176 parsedURL.query.insert_or_assign("shallow", "1");
177
178 return std::make_pair(
179 FlakeRef(Input::fromURL(parsedURL, isFlake), getOr(parsedURL.query, "dir", "")),
180 fragment);
181 }
```
Change-Id: Ib55a882eaeb3e59228857761dc1e3b2e366b0f5e
this was only used in one place, and that place has been rewritten to
use a temporary file instead. keeping this around is not very helpful
at this time, and in any case we'd be better off rewriting subprocess
handling in rust where we not only have a much safer library for such
things but also async frameworks necessary for this easily available.
Change-Id: I6f8641b756857c84ae2602cdf41f74ee7a1fda02
we want to remove runProgram's ability to provide stdin to a process
because the concurrency issues of handling both stdin and stdout are
much more pronounced once runProgram returns not is collected output
but a source. this is possible in the current c++ framework, however
it isn't necessary in almost all cases (as demonstrated by only this
single user existing) and in much better handled with a proper async
concurrency model that lets the caller handle both at the same time.
Change-Id: I29da1e1ad898d45e2e33a7320b246d5003e7712b
The original idea was to fix lix#174, but for a user friendly solution,
I figured that we'd need more consistency:
* Invalid query params will cause an error, just like invalid
attributes. This has the following two consequences:
* The `?dir=`-param from flakes will be removed before the URL to be
fetched is passed to libfetchers.
* The tarball fetcher doesn't allow URLs with custom query params
anymore. I think this was questionable anyways given that an
arbitrary set of query params was silently removed from the URL you
wanted to fetch. The correct way is to use an attribute-set
with a key `url` that contains the tarball URL to fetch.
* Same for the git & mercurial fetchers: in that case it doesn't even
matter though: both fetchers added unused query params to the URL
that's passed from the input scheme to the fetcher (`url2` in the code).
It turns out that this was never used since the query parameters were
erased again in `getActualUrl`.
* Validation happens for both attributes and URLs. Previously, a lot of
fetchers validated e.g. refs/revs only when specified in a URL and
the validity of attribute names only in `inputFromAttrs`.
Now, all the validation is done in `inputFromAttrs` and `inputFromURL`
constructs attributes that will be passed to `inputFromAttrs`.
* Accept all attributes as URL query parameters. That also includes
lesser used ones such as `narHash`.
And "output" attributes like `lastModified`: these could be declared
already when declaring inputs as attribute rather than URL. Now the
behavior is at least consistent.
Personally, I think we should differentiate in the future between
"fetched input" (basically the attr-set that ends up in the lock-file)
and "unfetched input" earlier: both inputFrom{Attrs,URL} entrypoints
are probably OK for unfetched inputs, but for locked/fetched inputs
a custom entrypoint should be used. Then, the current entrypoints
wouldn't have to allow these attributes anymore.
Change-Id: I1be1992249f7af8287cfc37891ab505ddaa2e8cd
Unfetched submodules are included as empty directories in archives, so they end
up as such in the store when fetched in clean mode. Make sure the same happens
in dirty mode too. Fortunately, they are already correctly represented in the
ls-files output, so we just need to make sure to include the empty directory in
our filter.
Fixes: https://github.com/NixOS/nix/issues/6247
Change-Id: I60d06ff360cfa305d081b920838c893c06da801c
Passing the commit message as an argument causes update failures on repositories with
lots of flake inputs. In some cases, the commit message is over 250,000 bytes.
Upstream PR: https://github.com/NixOS/nix/pull/10686
(cherry picked from commit 8b5e8f4fba5728f2b3e90fcd1ab15df77e3ea0e8)
Change-Id: I2c196a21cc9bedc24d57a828a0c5b9467e072f76
Committing a lock file using markFileChanged() required the input to
be writable by the caller in the local filesystem (using the path
returned by getSourcePath()). putFile() abstracts over this.
(cherry picked from commit 95d657c8b3ae4282e24628ba7426edb90c8f3942)
Change-Id: Ie081c5d9eb4e923b229191c5e23ece85145557ff
These now have equivalents in the standard lib in C++20. This change was
performed with a custom clang-tidy check which I will submit later.
Executed like so:
ninja -C build && run-clang-tidy -checks='-*,nix-*' -load=build/libnix-clang-tidy.so -p .. -fix ../tests | tee -a clang-tidy-result
Change-Id: I62679e315ff9e7ce72a40b91b79c3e9fc01b27e9
Don't attempt to `git add` ignored files
(cherry picked from commit 359990dfdc713c80aabd7ea6f7e4528628fbe108)
===
also added a regression test that isn't upstream to be sure we're
actually fixing the bug.
Change-Id: I8267a3d0ece9909d8008b7435b90e7b3eee366f6
Allow user input in `git commit`
(cherry picked from commit 43fb39ca29a0b054a4c18623520c496d27c57192)
Change-Id: I13bd4c007234ee2133289c68ef8ab2eae4def78a
Special-casing the file name is rather ugly, so we shouldn't do
that. So now any {file,http,https} URL is handled by
TarballInputScheme, except for non-flake inputs (i.e. inputs that have
the attribute `flake = false`).
Previously we would completely refetch the submodules from the
network, even though the repo might already have them. Now we copy the
.git/modules directory from the repo as an optimisation. This speeds
up evaluating
builtins.fetchTree { type = "git"; url = "/path/to/blender"; submodules = true; }
(where /path/to/blender already has the needed submodules) from 121s
to 57s.
This is still pretty inefficient and a hack, but a better solution is
best done on the lazy-trees branch.
This change also help in the case where the repo already has the
submodules but the origin is unfetchable for whatever reason
(e.g. there have been cases where Nix in a GitHub action doesn't have
the right authentication set up).
We cannot use 'actualUrl', because for file:// repos that's not the
original URL that the repo was fetched from. This is a problem since
submodules may be relative to the original URL.
Fixes e.g.
nix eval --impure --json --expr 'builtins.fetchTree { type = "git"; url = "/path/to/blender"; submodules = true; }'
where /path/to/blender is a clone of
https://github.com/blender/blender.git (which has several relative
submodules like '../blender-addons.git').
The git fetcher code used to dereference the (potentially empty) `ref`
input attribute. This was magically working, probably because the
compiler somehow outsmarted us, but is now blowing up with newer nixpkgs
versions.
Fix that by not trying to access this field while we don't know for sure
that it has been defined.
Fix#6554
Since a26be9f3b8, the same parser is used
to parse the result of sourcehut’s `HEAD` endpoint (coming from [git
dumb protocol]) and the output of `git ls-remote`. However, they are very
slightly different (the former doesn’t specify the current reference
since it’s implied to be `HEAD`).
Unify both, and make the parser a bit more robust and understandable (by
making it more typed and adding tests for it)
[git dumb protocol]: https://git-scm.com/book/en/v2/Git-Internals-Transfer-Protocols#_the_dumb_protocol
I'm afraid I missed a few problematic `git(1)`-calls while implementing
PR #6440, sorry for that! Upon investigating what went wrong, I realized
that I only tested against the "cached"-case by accident because my
git-checkout with my system's flake was apparently cached during my
debugging.
I managed to trigger the original issue again by running:
$ git commit --allow-empty -m "tmp"
$ sudo nixos-rebuild switch --flake .# -L --builders ''
Since `repoDir` points to the checkout that's potentially owned by
another user, I decided to add `--git-dir` to each call affecting
`repoDir`.
Since the `tmpDir` for the temporary submodule-checkout is created by
Nix itself, it doesn't seem to be an issue.
Sorry for that, it should be fine now.
The previous head caching implementation stored two paths in the local
cache; one for the cached git repo and another textfile containing the
resolved HEAD ref. This commit instead stores the resolved HEAD by
setting the HEAD ref in the local cache appropriately.
The `--git-dir=` must be `.` in some cases (for cached repos that are
"bare" repos in `~/.cache/nix/gitv3`). With this fix we can add
`--git-dir` to each `git`-invokation needed for `nixos-rebuild`.
To demonstrate the problem:
* You need a `git` at 2.33.3 in your $PATH
* An expression like this in a git repository:
``` nix
{
outputs = { self, nixpkgs }: {
packages.foo.x86_64-linux = with nixpkgs.legacyPackages.x86_64-linux;
runCommand "snens" { } ''
echo ${(builtins.fetchGit ./.).lastModifiedDate} > $out
'';
};
}
```
Now, when instantiating the package via `builtins.getFlake`, it fails on
Nix 2.7 like this:
$ nix-instantiate -E '(builtins.getFlake "'"$(pwd)"'").packages.foo.x86_64-linux'
fatal: unsafe repository ('/nix/store/a7j3125km4h8l0p71q6ssfkxamfh5d61-source' is owned by someone else)
To add an exception for this directory, call:
git config --global --add safe.directory /nix/store/a7j3125km4h8l0p71q6ssfkxamfh5d61-source
error: program 'git' failed with exit code 128
(use '--show-trace' to show detailed location information)
This breaks e.g. `nixops`-deployments using flakes with similar
expressions as shown above.
The cause for this is that `git(1)` tries to find the highest
`.git`-directory in the directory tree and if it finds a such a
directory, but with another owning user (root vs. the user who evaluates
the expression), it fails as above. This was changed recently to fix
CVE-2022-24765[1].
By explicitly specifying `--git-dir`, Git assumes to be in the top-level
directory and doesn't attempt to look for a `.git`-directory in the
parent directories and thus the code-path leading to said error is never
reached.
[1] https://lore.kernel.org/git/xmqqv8veb5i6.fsf@gitster.g/
