repl-overlays: Provide an elaborate example

This is the repl overlay from my dotfiles, which I think provides a reasonable and ergonomic set of variables. We can iterate on this over time, or (perhaps?) provide a sentinel value like `repl-overlays = <DEFAULT>` to include a "suggested default" overlay like this one.
2024-09-01 15:28:59 -07:00
3138 changed files with 99489 additions and 150479 deletions
@@ -1,14 +0,0 @@
-[target.'cfg(true)']
-rustflags = [
-	# rustc will pass `-nodefaultlibs` without this, but we need the C++ standard library.
-	'-Cdefault-linker-libraries=yes',
-]
-
-[target.'cfg(target_env = "musl")']
-rustflags = [
-	'-Cdefault-linker-libraries=yes',
-	# musl, at least in Nixpkgs, is not compiled with -fPIE.
-	# XXX: nevermind? as of Nixpkgs 26.05??
-	# Oh gods do we need to gate this??
-	#'-Crelocation-model=static',
-]
@@ -4,10 +4,9 @@ AccessModifierOffset: -4
 AlignAfterOpenBracket: BlockIndent
 AlignEscapedNewlines: Left
 AlignOperands: DontAlign
-AlignTrailingComments: false
-AllowShortBlocksOnASingleLine: Empty
+AllowShortBlocksOnASingleLine: Always
 AllowShortFunctionsOnASingleLine: Empty
-AllowShortIfStatementsOnASingleLine: Never
+AllowShortIfStatementsOnASingleLine: WithoutElse
 AlwaysBreakBeforeMultilineStrings: true
 AlwaysBreakTemplateDeclarations: Yes
 BinPackArguments: false
@@ -36,7 +35,7 @@ BreakAfterAttributes: Always
 BreakBeforeBinaryOperators: NonAssignment
 BreakBeforeBraces: Custom
 BreakConstructorInitializers: BeforeComma
-ColumnLimit: 110
+ColumnLimit: 100
 EmptyLineAfterAccessModifier: Leave
 EmptyLineBeforeAccessModifier: Leave
 FixNamespaceComments: false
@@ -8,16 +8,14 @@ Checks:
  - -bugprone-narrowing-conversions
    # kind of nonsense
  - -bugprone-easily-swappable-parameters
+    # too many warnings for now
+  - -bugprone-implicit-widening-of-multiplication-result
    # Lix's exception handling is Questionable
  - -bugprone-empty-catch
    # many warnings
  - -bugprone-unchecked-optional-access
    # many warnings, seems like a questionable lint
  - -bugprone-branch-clone
-    # we don't compile out our asserts
-  - -bugprone-assert-side-effect
-    # FIXME(jade): figure out if this warning is any good
-  - -bugprone-exception-escape
    # all thrown exceptions must derive from std::exception
  - hicpp-exception-baseclass
    # capturing async lambdas are dangerous
@@ -25,6 +23,9 @@ Checks:
    # crimes must be appropriately declared as crimes
  - cppcoreguidelines-pro-type-cstyle-cast
  - lix-*
+    # This can not yet be applied to Lix itself since we need to do source
+    # reorganization so that lix/ include paths work.
+  - -lix-fixincludes
    # This lint is included as an example, but the lib function it replaces is
    # already gone.
  - -lix-hasprefixsuffix
@@ -32,6 +33,3 @@ Checks:

 CheckOptions:
  bugprone-reserved-identifier.AllowedIdentifiers: '__asan_default_options'
-  bugprone-unused-return-value.AllowCastToVoid: true
-
-ExtraArgs: ["-Werror=unnecessary-virtual-specifier"]
@@ -29,11 +29,3 @@ trim_trailing_whitespace = false
 indent_style = space
 indent_size = 2
 max_line_length = 0
-
-[meson.build]
-indent_style = space
-indent_size = 2
-
-[*.json]
-indent_style = space
-indent_size = 4
@@ -2,7 +2,7 @@
 name: Missing or incorrect documentation
 about: Help us improve the reference manual
 title: ''
-labels: docs
+labels: documentation
 assignees: ''

 ---
@@ -19,10 +19,10 @@ assignees: ''

 <!-- make sure this issue is not redundant or obsolete -->

- [ ] checked [latest Lix manual] or its [source code]
+- [ ] checked [latest Lix manual] \([source]\)
 - [ ] checked [documentation issues] and [recent documentation changes] for possible duplicates

-[latest Lix manual]: https://docs.lix.systems/manual/lix/nightly
-[source code]: https://git.lix.systems/lix-project/lix/src/main/doc/manual/src
+[latest Nix manual]: https://docs.lix.systems/manual/lix/nightly
+[source]: https://git.lix.systems/lix-project/lix/src/main/doc/manual/src
 [documentation issues]: https://git.lix.systems/lix-project/lix/issues?labels=151&state=all
 [recent documentation changes]: https://gerrit.lix.systems/q/p:lix+path:%22%5Edoc/manual/.*%22
@@ -1,5 +1,4 @@
-/build
-/outputs
+outputs/

 # GNU Global
 GPATH
@@ -37,11 +36,3 @@ buildtime.bin

 # Rust build files when using Cargo (not actually supported for building but it spews the files anyway)
 /target/
-
-# Python compiled files from the code generators and test suite
-*.pyc
-
-**/.idea
-
-# Yeah, I've got no clue.
-/subprojects/.wraplock
@@ -1,5 +0,0 @@
-Fiona Behrens <me@kloenk.dev>
-Fiona Behrens <me@kloenk.dev> <me@kloenk.de>
-rootile <lix@rootile.de>
-rootile <lix@rootile.de> <commentator2.0@crystal-cavern.systems>
-rootile <lix@rootile.de> <lix@crystal-cavern.systems>
@@ -1,255 +1,6 @@
 # This file is automatically @generated by Cargo.
 # It is not intended for manual editing.
-version = 4
-
-[[package]]
-name = "aho-corasick"
-version = "1.1.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ddd31a130427c27518df266943a5308ed92d4b226cc639f5a8f1002816174301"
-dependencies = [
- "memchr",
-]
-
-[[package]]
-name = "allocator-api2"
-version = "0.2.21"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "683d7910e743518b0e34f1186f92494becacb047c7b6bf616c96772180fef923"
-
-[[package]]
-name = "anstream"
-version = "1.0.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "824a212faf96e9acacdbd09febd34438f8f711fb84e09a8916013cd7815ca28d"
-dependencies = [
- "anstyle",
- "anstyle-parse",
- "anstyle-query",
- "anstyle-wincon",
- "colorchoice",
- "is_terminal_polyfill",
- "utf8parse",
-]
-
-[[package]]
-name = "anstyle"
-version = "1.0.14"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "940b3a0ca603d1eade50a4846a2afffd5ef57a9feac2c0e2ec2e14f9ead76000"
-
-[[package]]
-name = "anstyle-parse"
-version = "1.0.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "52ce7f38b242319f7cabaa6813055467063ecdc9d355bbb4ce0c68908cd8130e"
-dependencies = [
- "utf8parse",
-]
-
-[[package]]
-name = "anstyle-query"
-version = "1.1.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "40c48f72fd53cd289104fc64099abca73db4166ad86ea0b4341abe65af83dadc"
-dependencies = [
- "windows-sys",
-]
-
-[[package]]
-name = "anstyle-wincon"
-version = "3.0.11"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "291e6a250ff86cd4a820112fb8898808a366d8f9f58ce16d1f538353ad55747d"
-dependencies = [
- "anstyle",
- "once_cell_polyfill",
- "windows-sys",
-]
-
-[[package]]
-name = "ar_archive_writer"
-version = "0.5.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "4087686b4b0a3427190bae57a1d9a478dbb2d40c5dc1bd6e2b6d797913bdd348"
-dependencies = [
- "object",
-]
-
-[[package]]
-name = "ariadne"
-version = "0.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "72fe02fc62033df9ba41cba57ee19acf5e742511a140c7dbc3a873e19a19a1bd"
-dependencies = [
- "unicode-width 0.1.14",
- "yansi",
-]
-
-[[package]]
-name = "askama"
-version = "0.12.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b79091df18a97caea757e28cd2d5fda49c6cd4bd01ddffd7ff01ace0c0ad2c28"
-dependencies = [
- "askama_derive",
- "askama_escape",
- "humansize",
- "num-traits",
- "percent-encoding",
-]
-
-[[package]]
-name = "askama_derive"
-version = "0.12.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "19fe8d6cb13c4714962c072ea496f3392015f0989b1a2847bb4b2d9effd71d83"
-dependencies = [
- "askama_parser",
- "basic-toml",
- "mime",
- "mime_guess",
- "proc-macro2",
- "quote",
- "serde",
- "syn",
-]
-
-[[package]]
-name = "askama_escape"
-version = "0.10.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "619743e34b5ba4e9703bba34deac3427c72507c7159f5fd030aea8cac0cfe341"
-
-[[package]]
-name = "askama_parser"
-version = "0.2.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "acb1161c6b64d1c3d83108213c2a2533a342ac225aabd0bda218278c2ddb00c0"
-dependencies = [
- "nom",
-]
-
-[[package]]
-name = "autocfg"
-version = "1.5.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f2032f911046de80f0a198e0901378627c33f59ea0ac00e363d481118bd70a53"
-
-[[package]]
-name = "basic-toml"
-version = "0.1.10"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ba62675e8242a4c4e806d12f11d136e626e6c8361d6b829310732241652a178a"
-dependencies = [
- "serde",
-]
-
-[[package]]
-name = "bitflags"
-version = "2.13.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b4388bee8683e3d04af747c73422af53102d2bd24d9eadb6cbc100baef4b43f8"
-
-[[package]]
-name = "block-buffer"
-version = "0.10.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3078c7629b62d3f0439517fa394996acacc5cbc91c5a20d8c658e77abd503a71"
-dependencies = [
- "generic-array",
-]
-
-[[package]]
-name = "cc"
-version = "1.2.65"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e228eec9be7c17ccb640b59b36a5cd805ea2a564a4c5e162c2f659fea30d3b96"
-dependencies = [
- "find-msvc-tools",
- "shlex",
-]
-
-[[package]]
-name = "cfg-if"
-version = "1.0.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9330f8b2ff13f34540b44e946ef35111825727b38d33286ef986142615121801"
-
-[[package]]
-name = "cfg_aliases"
-version = "0.2.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "613afe47fcd5fac7ccf1db93babcb082c5994d996f20b8b159f2ad1658eb5724"
-
-[[package]]
-name = "chumsky"
-version = "1.0.0-alpha.8"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0e82d74e6c83060ec269fe9e0d408d6de4a1645d525f9a0bbbb841ba4efd91ac"
-dependencies = [
- "hashbrown 0.15.5",
- "regex-automata 0.3.9",
- "serde",
- "stacker",
- "unicode-ident",
- "unicode-segmentation",
-]
-
-[[package]]
-name = "clap"
-version = "4.6.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1ddb117e43bbf7dacf0a4190fef4d345b9bad68dfc649cb349e7d17d28428e51"
-dependencies = [
- "clap_builder",
- "clap_derive",
-]
-
-[[package]]
-name = "clap_builder"
-version = "4.6.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "714a53001bf66416adb0e2ef5ac857140e7dc3a0c48fb28b2f10762fc4b5069f"
-dependencies = [
- "anstream",
- "anstyle",
- "clap_lex",
- "strsim",
-]
-
-[[package]]
-name = "clap_derive"
-version = "4.6.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f2ce8604710f6733aa641a2b3731eaa1e8b3d9973d5e3565da11800813f997a9"
-dependencies = [
- "heck",
- "proc-macro2",
- "quote",
- "syn",
-]
-
-[[package]]
-name = "clap_lex"
-version = "1.1.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c8d4a3bb8b1e0c1050499d1815f5ab16d04f0959b233085fb31653fbfc9d98f9"
-
-[[package]]
-name = "clipboard-win"
-version = "5.4.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bde03770d3df201d4fb868f2c9c59e66a3e4e2bd06692a0fe701e7103c7e84d4"
-dependencies = [
- "error-code",
-]
-
-[[package]]
-name = "colorchoice"
-version = "1.0.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1d07550c9036bf2ae0c684c4297d503f838287c83c53686d05370d0e139ae570"
+version = 3

 [[package]]
 name = "countme"
@@ -257,65 +8,12 @@ version = "3.0.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "7704b5fdd17b18ae31c4c1da5a2e0305a2bf17b5249300a9ee9ed7b72114c636"

-[[package]]
-name = "cpufeatures"
-version = "0.2.17"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "59ed5838eebb26a2bb2e58f6d5b5316989ae9d08bab10e0e6d103e656d1b0280"
-dependencies = [
- "libc",
-]
-
-[[package]]
-name = "crypto-common"
-version = "0.1.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "78c8292055d1c1df0cce5d180393dc8cce0abec0a7102adb6c7b1eef6016d60a"
-dependencies = [
- "generic-array",
- "typenum",
-]
-
-[[package]]
-name = "digest"
-version = "0.10.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9ed9a281f7bc9b7576e61468ba615a66a5c8cfdff42420a70aa82701a3b1e292"
-dependencies = [
- "block-buffer",
- "crypto-common",
-]
-
 [[package]]
 name = "dissimilar"
 version = "1.0.9"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "59f8e79d1fbf76bdfbde321e902714bf6c49df88a7dda6fc682fc2979226962d"

-[[package]]
-name = "either"
-version = "1.16.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "91622ff5e7162018101f2fea40d6ebf4a78bbe5a49736a2020649edf9693679e"
-
-[[package]]
-name = "endian-type"
-version = "0.2.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "869b0adbda23651a9c5c0c3d270aac9fcb52e8622a8f2b17e57802d7791962f2"
-
-[[package]]
-name = "equivalent"
-version = "1.0.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "877a4ace8713b0bcf2a4e7eec82529c029f1d0619886d18145fea96c3ffe5c0f"
-
-[[package]]
-name = "error-code"
-version = "3.3.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dea2df4cf52843e0452895c455a1a2cfbb842a1e7329671acf418fdc53ed4c59"
-
 [[package]]
 name = "expect-test"
 version = "1.5.0"
@@ -326,139 +24,12 @@ dependencies = [
 "once_cell",
 ]

-[[package]]
-name = "find-msvc-tools"
-version = "0.1.9"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5baebc0774151f905a1a2cc41989300b1e6fbb29aff0ceffa1064fdd3088d582"
-
-[[package]]
-name = "foldhash"
-version = "0.1.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d9c4f5dac5e15c24eb999c26181a6ca40b39fe946cbe4c263c7209467bc83af2"
-
-[[package]]
-name = "generic-array"
-version = "0.14.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "85649ca51fd72272d7821adaf274ad91c288277713d9c18820d8499a7ff69e9a"
-dependencies = [
- "typenum",
- "version_check",
-]
-
 [[package]]
 name = "hashbrown"
 version = "0.14.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "e5274423e17b7c9fc20b6e7e208532f9b19825d82dfd615708b70edd83df41f1"

-[[package]]
-name = "hashbrown"
-version = "0.15.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9229cfe53dfd69f0609a49f65461bd93001ea1ef889cd5529dd176593f5338a1"
-dependencies = [
- "allocator-api2",
- "equivalent",
- "foldhash",
-]
-
-[[package]]
-name = "hashbrown"
-version = "0.17.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ed5909b6e89a2db4456e54cd5f673791d7eca6732202bbf2a9cc504fe2f9b84a"
-
-[[package]]
-name = "heck"
-version = "0.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2304e00983f87ffb38b55b444b5e3b60a884b5d30c0fca7d82fe33449bbe55ea"
-
-[[package]]
-name = "hex"
-version = "0.4.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7f24254aa9a54b5c858eaee2f5bccdb46aaf0e486a595ed5fd8f86ba55232a70"
-
-[[package]]
-name = "home"
-version = "0.5.12"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "cc627f471c528ff0c4a49e1d5e60450c8f6461dd6d10ba9dcd3a61d3dff7728d"
-dependencies = [
- "windows-sys",
-]
-
-[[package]]
-name = "humansize"
-version = "2.1.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6cb51c9a029ddc91b07a787f1d86b53ccfa49b0e86688c946ebe8d3555685dd7"
-dependencies = [
- "libm",
-]
-
-[[package]]
-name = "indexmap"
-version = "2.14.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d466e9454f08e4a911e14806c24e16fba1b4c121d1ea474396f396069cf949d9"
-dependencies = [
- "equivalent",
- "hashbrown 0.17.1",
-]
-
-[[package]]
-name = "is_terminal_polyfill"
-version = "1.70.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a6cb138bb79a146c1bd460005623e142ef0181e3d0219cb493e02f7d08a35695"
-
-[[package]]
-name = "itertools"
-version = "0.11.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b1c173a5686ce8bfa551b3563d0c2170bf24ca44da99c7ca4bfdab5418c3fe57"
-dependencies = [
- "either",
-]
-
-[[package]]
-name = "libc"
-version = "0.2.186"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "68ab91017fe16c622486840e4c83c9a37afeff978bd239b5293d61ece587de66"
-
-[[package]]
-name = "libm"
-version = "0.2.16"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b6d2cec3eae94f9f509c767b45932f1ada8350c4bdb85af2fcab4a3c14807981"
-
-[[package]]
-name = "licxxbridge"
-version = "0.0.0"
-dependencies = [
- "clap",
- "zngur",
-]
-
-[[package]]
-name = "lix"
-version = "0.0.0"
-dependencies = [
- "lix-doc",
- "pkg-config",
- "regex",
- "rootcause",
- "rustyline",
- "rustyline-derive",
- "zngur",
-]
-
 [[package]]
 name = "lix-doc"
 version = "0.0.1"
@@ -468,228 +39,21 @@ dependencies = [
 "rowan",
 ]

-[[package]]
-name = "log"
-version = "0.4.33"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0ceec5bc11778974d1bcb055b18002eba7f4b3518b6a0081b3af5f21666da9ad"
-
-[[package]]
-name = "memchr"
-version = "2.8.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "88904434abc2901f197fe8cc55f0445e7ded921dba5911dad2e2b39b48e663c4"
-
-[[package]]
-name = "mime"
-version = "0.3.17"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6877bb514081ee2a7ff5ef9de3281f14a4dd4bceac4c09388074a6b5df8a139a"
-
-[[package]]
-name = "mime_guess"
-version = "2.0.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f7c44f8e672c00fe5308fa235f821cb4198414e1c77935c1ab6948d3fd78550e"
-dependencies = [
- "mime",
- "unicase",
-]
-
-[[package]]
-name = "minimal-lexical"
-version = "0.2.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "68354c5c6bd36d73ff3feceb05efa59b6acb7626617f4962be322a825e61f79a"
-
-[[package]]
-name = "nibble_vec"
-version = "0.1.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "77a5d83df9f36fe23f0c3648c6bbb8b0298bb5f1939c8f2704431371f4b84d43"
-dependencies = [
- "smallvec",
-]
-
-[[package]]
-name = "nix"
-version = "0.31.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "cf20d2fde8ff38632c426f1165ed7436270b44f199fc55284c38276f9db47c3d"
-dependencies = [
- "bitflags",
- "cfg-if",
- "cfg_aliases",
- "libc",
-]
-
-[[package]]
-name = "nom"
-version = "7.1.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d273983c5a657a70a3e8f2a01329822f3b8c8172b73826411a55751e404a0a4a"
-dependencies = [
- "memchr",
- "minimal-lexical",
-]
-
-[[package]]
-name = "num-traits"
-version = "0.2.19"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "071dfc062690e90b734c0b2273ce72ad0ffa95f0c74596bc250dcfd960262841"
-dependencies = [
- "autocfg",
-]
-
-[[package]]
-name = "object"
-version = "0.37.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ff76201f031d8863c38aa7f905eca4f53abbfa15f609db4277d44cd8938f33fe"
-dependencies = [
- "memchr",
-]
-
 [[package]]
 name = "once_cell"
 version = "1.19.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "3fdb12b2476b595f9358c5161aa467c2438859caa136dec86c26fdd2efe17b92"

-[[package]]
-name = "once_cell_polyfill"
-version = "1.70.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "384b8ab6d37215f3c5301a95a4accb5d64aa607f1fcb26a11b5303878451b4fe"
-
-[[package]]
-name = "percent-encoding"
-version = "2.3.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9b4f627cb1b25917193a259e49bdad08f671f8d9708acfd5fe0a8c1455d87220"
-
-[[package]]
-name = "pkg-config"
-version = "0.3.33"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "19f132c84eca552bf34cab8ec81f1c1dcc229b811638f9d283dceabe58c5569e"
-
-[[package]]
-name = "proc-macro2"
-version = "1.0.106"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8fd00f0bb2e90d81d1044c2b32617f68fcb9fa3bb7640c23e9c748e53fb30934"
-dependencies = [
- "unicode-ident",
-]
-
-[[package]]
-name = "psm"
-version = "0.1.31"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "645dbe486e346d9b5de3ef16ede18c26e6c70ad97418f4874b8b1889d6e761ea"
-dependencies = [
- "ar_archive_writer",
- "cc",
-]
-
-[[package]]
-name = "quote"
-version = "1.0.45"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "41f2619966050689382d2b44f664f4bc593e129785a36d6ee376ddf37259b924"
-dependencies = [
- "proc-macro2",
-]
-
-[[package]]
-name = "radix_trie"
-version = "0.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3b4431027dcd37fc2a73ef740b5f233aa805897935b8bce0195e41bbf9a3289a"
-dependencies = [
- "endian-type",
- "nibble_vec",
-]
-
-[[package]]
-name = "regex"
-version = "1.12.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f1292b7759ae1cb9ec195452d1390a074f0cd8541ab7a5a8c31cd6db45d4a6ba"
-dependencies = [
- "aho-corasick",
- "memchr",
- "regex-automata 0.4.14",
- "regex-syntax 0.8.11",
-]
-
-[[package]]
-name = "regex-automata"
-version = "0.3.9"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "59b23e92ee4318893fa3fe3e6fb365258efbfe6ac6ab30f090cdcbb7aa37efa9"
-dependencies = [
- "aho-corasick",
- "memchr",
- "regex-syntax 0.7.5",
-]
-
-[[package]]
-name = "regex-automata"
-version = "0.4.14"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6e1dd4122fc1595e8162618945476892eefca7b88c52820e74af6262213cae8f"
-dependencies = [
- "aho-corasick",
- "memchr",
- "regex-syntax 0.8.11",
-]
-
-[[package]]
-name = "regex-syntax"
-version = "0.7.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dbb5fb1acd8a1a18b3dd5be62d25485eb770e05afb408a9627d14d451bae12da"
-
-[[package]]
-name = "regex-syntax"
-version = "0.8.11"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d6f6ff9a378485b298a5286656da665ba74413d36db0979633275d2e708145d4"
-
 [[package]]
 name = "rnix"
-version = "0.12.0"
+version = "0.11.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6f15e00b0ab43abd70d50b6f8cd021290028f9b7fdd7cdfa6c35997173bc1ba9"
+checksum = "bb35cedbeb70e0ccabef2a31bcff0aebd114f19566086300b8f42c725fc2cb5f"
 dependencies = [
 "rowan",
 ]

-[[package]]
-name = "rootcause"
-version = "0.13.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b660d9968fae12f4e691f2b2be5d9a3a6de875300c682e8d2cb89a618dd60875"
-dependencies = [
- "hashbrown 0.17.1",
- "indexmap",
- "rootcause-internals",
- "rustc-hash 2.1.3",
- "triomphe",
-]
-
-[[package]]
-name = "rootcause-internals"
-version = "0.13.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0184f6fcff3b58b7c963aee6e3cc915c04331aa6eef974f79d7d44d21e246c24"
-dependencies = [
- "triomphe",
-]
-
 [[package]]
 name = "rowan"
 version = "0.15.16"
@@ -697,8 +61,8 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "0a542b0253fa46e632d27a1dc5cf7b930de4df8659dc6e720b647fc72147ae3d"
 dependencies = [
 "countme",
- "hashbrown 0.14.5",
- "rustc-hash 1.1.0",
+ "hashbrown",
+ "rustc-hash",
 "text-size",
 ]

@@ -708,250 +72,8 @@ version = "1.1.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "08d43f7aa6b08d49f382cde6a7982047c3426db949b1424bc4b7ec9ae12c6ce2"

-[[package]]
-name = "rustc-hash"
-version = "2.1.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6b1e7f9a428571be2dc5bc0505c13fb6bf936822b894ec87abf8a08a4e51742d"
-
-[[package]]
-name = "rustyline"
-version = "18.0.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "53f6a737db68eb1a8ccff86b584b2fc13eca6a7bb6f78ebc7c529547e3ab9684"
-dependencies = [
- "bitflags",
- "cfg-if",
- "clipboard-win",
- "home",
- "libc",
- "log",
- "memchr",
- "nix",
- "radix_trie",
- "unicode-segmentation",
- "unicode-width 0.2.2",
- "utf8parse",
- "windows-sys",
-]
-
-[[package]]
-name = "rustyline-derive"
-version = "0.12.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "64e5587417a3c4e16a4415e8d7d07f80998ed835ade621d19dfbe9fbe3205b0f"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn",
-]
-
-[[package]]
-name = "serde"
-version = "1.0.228"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9a8e94ea7f378bd32cbbd37198a4a91436180c5bb472411e48b5ec2e2124ae9e"
-dependencies = [
- "serde_core",
- "serde_derive",
-]
-
-[[package]]
-name = "serde_core"
-version = "1.0.228"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "41d385c7d4ca58e59fc732af25c3983b67ac852c1a25000afe1175de458b67ad"
-dependencies = [
- "serde_derive",
-]
-
-[[package]]
-name = "serde_derive"
-version = "1.0.228"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d540f220d3187173da220f885ab66608367b6574e925011a9353e4badda91d79"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn",
-]
-
-[[package]]
-name = "sha2"
-version = "0.10.9"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a7507d819769d01a365ab707794a4084392c824f54a7a6a7862f8c3d0892b283"
-dependencies = [
- "cfg-if",
- "cpufeatures",
- "digest",
-]
-
-[[package]]
-name = "shlex"
-version = "2.0.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f8fadd59c855ef2080decdef8ff161eb6661b86933c9d82e5ba29dc602a55aba"
-
-[[package]]
-name = "smallvec"
-version = "1.15.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8ed6a63f02c8539c91a8685a86f4099661ba3da017932f6ebbea6de3f0fa7c90"
-
-[[package]]
-name = "stacker"
-version = "0.1.24"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "640c8cdd92b6b12f5bcb1803ca3bbf5ab96e5e6b6b96b9ab77dabe9e880b3190"
-dependencies = [
- "cc",
- "cfg-if",
- "libc",
- "psm",
- "windows-sys",
-]
-
-[[package]]
-name = "strsim"
-version = "0.11.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7da8b5736845d9f2fcb837ea5d9e2628564b3b043a70948a3f0b778838c5fb4f"
-
-[[package]]
-name = "syn"
-version = "2.0.118"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1b9ae57f904213ebb649ce6895b8a66c66f0203b9319718f69a5612a065b1422"
-dependencies = [
- "proc-macro2",
- "quote",
- "unicode-ident",
-]
-
 [[package]]
 name = "text-size"
 version = "1.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "f18aa187839b2bdb1ad2fa35ead8c4c2976b64e4363c386d45ac0f7ee85c9233"
-
-[[package]]
-name = "triomphe"
-version = "0.1.16"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b40688ea6389c8171614b25491f71d4a27946e0c7ce2da1c6de27e25abf1a0ae"
-
-[[package]]
-name = "typenum"
-version = "1.20.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b6f5e870be6c3b371b77fe0ee0bafb859fa4964b4404c27de1d380043c4dda20"
-
-[[package]]
-name = "unicase"
-version = "2.9.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dbc4bc3a9f746d862c45cb89d705aa10f187bb96c76001afab07a0d35ce60142"
-
-[[package]]
-name = "unicode-ident"
-version = "1.0.24"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e6e4313cd5fcd3dad5cafa179702e2b244f760991f45397d14d4ebf38247da75"
-
-[[package]]
-name = "unicode-segmentation"
-version = "1.13.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c6f5d3c3b1bf09027a88a6bc961fc00497d651009560b5463668dc81b0fa87a8"
-
-[[package]]
-name = "unicode-width"
-version = "0.1.14"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7dd6e30e90baa6f72411720665d41d89b9a3d039dc45b8faea1ddd07f617f6af"
-
-[[package]]
-name = "unicode-width"
-version = "0.2.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b4ac048d71ede7ee76d585517add45da530660ef4390e49b098733c6e897f254"
-
-[[package]]
-name = "utf8parse"
-version = "0.2.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "06abde3611657adf66d383f00b093d7faecc7fa57071cce2578660c9f1010821"
-
-[[package]]
-name = "version_check"
-version = "0.9.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0b928f33d975fc6ad9f86c8f283853ad26bdd5b10b7f1542aa2fa15e2289105a"
-
-[[package]]
-name = "windows-link"
-version = "0.2.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f0805222e57f7521d6a62e36fa9163bc891acd422f971defe97d64e70d0a4fe5"
-
-[[package]]
-name = "windows-sys"
-version = "0.61.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ae137229bcbd6cdf0f7b80a31df61766145077ddf49416a728b02cb3921ff3fc"
-dependencies = [
- "windows-link",
-]
-
-[[package]]
-name = "yansi"
-version = "0.5.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "09041cd90cf85f7f8b2df60c646f853b7f535ce68f85244eb6731cf89fa498ec"
-
-[[package]]
-name = "zngur"
-version = "0.10.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7fc912d12934b4d04aabc52c14db6fc88ae8aa5a47902f27e8759c2de254723f"
-dependencies = [
- "zngur-generator",
-]
-
-[[package]]
-name = "zngur-def"
-version = "0.10.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8f27e49a62db537cea43a6c122ded7eda99c4ac0ca1d7cfd74f2bf6a6c88712d"
-dependencies = [
- "indexmap",
- "itertools",
-]
-
-[[package]]
-name = "zngur-generator"
-version = "0.10.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5ffad8c6994c477023aba7613bdf17c470003bbd191846d3096e84ffecf86d4c"
-dependencies = [
- "askama",
- "hex",
- "indexmap",
- "itertools",
- "sha2",
- "zngur-def",
- "zngur-parser",
-]
-
-[[package]]
-name = "zngur-parser"
-version = "0.10.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8d66c1b85ca6eab9576df5de31758cb1f9046b4ce47b25f45dabcb0fc7ef8789"
-dependencies = [
- "ariadne",
- "chumsky",
- "itertools",
- "zngur-def",
-]
@@ -1,28 +1,6 @@
 [workspace]
 resolver = "2"
-members = [
-	"lix/lix-doc",
-	"lix/lix-rs",
-	"tools/licxxbridge",
-]
+members = ["src/lix-doc"]

 [workspace.package]
 edition = "2021"
-
-[workspace.dependencies]
-clap = "4"
-regex = "1.12.4"
-rootcause = "0.13.0"
-rustyline = "18"
-rustyline-derive = "0.12"
-syn = "2.0"
-zngur = "0.10"
-pkg-config = "0.3.33"
-
-[profile.dev]
-opt-level = 1
-
-[profile.release]
-debug = "full"
-debug-assertions = true
-overflow-checks = true
@@ -1,26 +0,0 @@
-# Docs
-per-file README.md=*
-per-file CONTRIBUTING.md=*
-
-# DevX
-per-file justfile=*
-per-file .envrc=*
-per-file .gitignore=*
-per-file .github=*
-per-file .mailmap=*
-
-# Build
-per-file meson.build=*
-per-file meson.options=*
-per-file flake.nix=*
-per-file flake.lock=*
-per-file *.nix=*
-per-file Cargo.lock=*
-per-file Cargo.toml=*
-per-file version.json=*
-
-# Code style
-per-file .clang-tidy=*
-per-file .clang-format=*
-per-file .editorconfig=*
-per-file treefmt.toml=*
@@ -17,13 +17,10 @@ For systems that **already have a Nix implementation installed**, such as NixOS

 ## Building And Developing

-See our [Hacking guide](https://git.lix.systems/lix-project/lix/src/branch/main/doc/manual/src/contributing/hacking.md) in our manual for instruction on how to set up a development environment and build Lix from source.
+See our [Hacking guide](https://git.lix.systems/lix-project/lix/src/branch/main/doc/manual/src/contributing/hacking.md) in our manual for instruction on how to to set up a development environment and build Lix from source.

 ## Additional Resources

- The Lix reference manual:
-  - [Stable](https://docs.lix.systems/manual/lix/stable/)
-  - [Nightly](https://docs.lix.systems/manual/lix/nightly/) (NOTE: [not automatically updated, yet](https://git.lix.systems/lix-project/lix/issues/742))
 - [Our wiki](https://wiki.lix.systems)
 - [Matrix - #space:lix.systems](https://matrix.to/#/#space:lix.systems)

@@ -1,4 +1,3 @@
 bench-*.json
 bench-*.md
-perf-*.json
 nixpkgs
@@ -1 +0,0 @@
-*
@@ -1,238 +0,0 @@
-#!/usr/bin/env nix-shell
-#!nix-shell -i python3 -p python3 -p hyperfine -p "if stdenv.isLinux then linuxPackages.perf else null"
-
-import argparse
-import subprocess
-import os
-import json
-import tempfile
-import platform
-import shlex
-import textwrap
-import dataclasses
-from pathlib import Path
-
-flake_args = ["--extra-experimental-features", "nix-command flakes"]
-cases = {
-    "search": lambda build: [
-        f"{build}/bin/nix",
-        *flake_args,
-        "search",
-        "--no-eval-cache",
-        f"path:{Path('./bench/nixpkgs/').readlink()}",
-        "hello",
-    ],
-    "rebuild": lambda build: [
-        f"{build}/bin/nix",
-        *flake_args,
-        "eval",
-        "--raw",
-        "--impure",
-        "--expr",
-        textwrap.dedent("""
-            (import <nixpkgs/nixos> {
-                configuration = ./bench/nixpkgs/nixos/modules/installer/cd-dvd/installation-cd-graphical-calamares-plasma6.nix;
-            }).config.system.build.toplevel
-        """).replace("\n", " "),
-    ],
-    "rebuild_lh": lambda build: [
-        "GC_INITIAL_HEAP_SIZE=10g",
-        *cases['rebuild'](build),
-    ],
-    "parse": lambda build: [
-        f"{build}/bin/nix",
-        *flake_args,
-        "eval",
-        "-f",
-        "bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix",
-    ],
-}
-
-arg_parser = argparse.ArgumentParser()
-# FIXME(jade, gilice): it is a reasonable use case to want to run a benchmark run
-# on just one build. However, since we are using hyperfine in comparison
-# mode, we would have to combine the JSON ourselves to support that, which
-# would probably be better done by writing a benchmarking script in
-# not-bash.
-arg_parser.add_argument(
-    'builds',
-    nargs='+',
-    help="At least two build directories to compare, containing bin/nix",
-)
-arg_parser.add_argument(
-    '--cases',
-    type=str,
-    help="A comma-separated list of cases you want to run. Defaults to running all",
-)
-arg_parser.add_argument(
-    '--mode',
-    nargs='+',
-    choices=[ "walltime", "memory" ] + [ "icount" ] if platform.system() == 'Linux' else [], # perf doesn't run on Darwin
-    default=[ "walltime" ],
-)
-arg_parser.add_argument(
-    '--daemon',
-    action='store_true',
-    help='Run a temporary daemon for the benchmark instead of using a local store directly',
-)
-args = arg_parser.parse_args()
-if len(args.builds) < 1:
-    raise ValueError("need at least one build directory to benchmark")
-
-benchmarks: list[str] = []
-if args.cases is None:
-    benchmarks = list(cases.keys())
-else:
-    for case in args.cases.split(","):
-        if case not in cases:
-            raise ValueError(f"no such case: {case}")
-        benchmarks.append(case)
-
-def make_full_command(build, case):
-    cmd = " ".join(map(shlex.quote, cases[case](build)))
-    if args.daemon:
-        return " ".join([
-            f"{build}/bin/nix --extra-experimental-features nix-command daemon &",
-            "trap 'kill %1' EXIT;",
-            f"NIX_REMOTE=daemon {cmd}",
-        ])
-    else:
-        return cmd
-
-def bench_walltime(env):
-    for case in benchmarks:
-        for build in args.builds:
-            subprocess.run([
-                "taskset", "-c", "2,3",
-                "chrt", "-f","50",
-                *[
-                    "hyperfine", "--warmup", "2", "--runs", "10",
-                    "--export-json", f"bench/bench-{case}-{build}.json",
-                    "--export-markdown", f"bench/bench-{case}-{build}.md",
-                    "--", make_full_command(build, case),
-                ],
-            ], env=env, check=True)
-
-    print("Benchmarks summary\n---\n")
-    for case in benchmarks:
-        results = []
-        for build in args.builds:
-            with open(f"bench/bench-{case}-{build}.json") as fd:
-                results.append(json.load(fd)["results"][0])
-        for result in results:
-            print(result["command"])
-            print("-" * min(80,len(result["command"])))
-            def attr_rounded(attr):
-                return f"{result[attr]:.3f}"
-            print("  mean:    ", attr_rounded("mean"), "±", attr_rounded("stddev"))
-            print("            user:",  attr_rounded("user"), "| system", attr_rounded("system"))
-            print("  median:  ", attr_rounded("median"))
-            print("  range:   ", attr_rounded("min") + "s.." + attr_rounded("max")+"s")
-            print("  relative:", f"{result["mean"]/results[0]["mean"]:.3f}")
-            print("\n")
-
-
-def bench_icount(env):
-    perf_results_for: dict[str, list[tuple[str, float]]] = {}
-    for case in benchmarks:
-        for build in args.builds:
-            # the perf stat -j output (incorrectly) localizes numbers, which will trip up the json parser.
-            env["LC_ALL"]="C"
-            case_command = make_full_command(build, case)
-            commandline = [
-                "perf", "stat", "-o", f"bench/perf-{case}.json", "-j",
-                "sh", "-c", case_command,
-            ]
-            print("running", case_command)
-            subprocess.run(commandline, env=env, check=True, stdout=subprocess.DEVNULL) # warmup run
-            subprocess.run(commandline, env=env, check=True, stdout=subprocess.DEVNULL)
-            perf_fd = open(f"bench/perf-{case}.json")
-            perf_data = [json.loads(x) for x in perf_fd.readlines()]
-            perf_fd.close()
-
-            instr = next(x for x in perf_data if x["event"] in ["instructions", "instructions:u"]) # an implementation of a find_first iterator
-            if case not in perf_results_for:
-                perf_results_for[case] = []
-            perf_results_for[case].append((case_command, float(instr["counter-value"])))
-
-    print("Benchmarks summary\n---\n")
-    for (case, entries) in perf_results_for.items():
-        for entry in entries:
-            cmd,instr = entry
-            print(cmd)
-            print("-" * min(80,len(cmd)))
-            print("  instructions:         ", int(instr))
-            print("  relative instructions:", int(instr)/perf_results_for[case][0][1])
-            print("\n")
-
-@dataclasses.dataclass
-class MemoryStatistics:
-    envBytes: int
-    listBytes: int
-    setBytes: int
-    valueBytes: int
-    heapBytes: int
-    heapSize: int
-
-def bench_memory(env):
-    path = "bench/bench-memory.json"
-    env = env | {
-        'NIX_SHOW_STATS': '1',
-        'NIX_SHOW_STATS_PATH': path,
-    }
-    results: dict[str, list[tuple[str, MemoryStatistics]]] = {}
-    for case in benchmarks:
-        for build in args.builds:
-            case_command = make_full_command(build, case)
-            commandline = [ "sh", "-c", case_command ]
-            print("running", case_command)
-            subprocess.run(commandline, env=env, check=True, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
-            with open(path) as fd:
-                stats = json.load(fd)
-            results.setdefault(case, []).append((case_command, MemoryStatistics(
-                envBytes=stats['envs']['bytes'],
-                listBytes=stats['list']['bytes'],
-                setBytes=stats['sets']['bytes'],
-                valueBytes=stats['values']['bytes'],
-                heapSize=stats['gc']['heapSize'],
-                heapBytes=stats['gc']['totalBytes'],
-            )))
-
-    print("Benchmarks summary\n---\n")
-    for (case, entries) in results.items():
-        for cmd, stats in entries:
-            print(cmd)
-            print("-" * min(80, len(cmd)))
-            print(f"  env bytes:    {stats.envBytes  :15d}   |  {(stats.envBytes / entries[0][1].envBytes)    :.3f}x")
-            print(f"  list bytes:   {stats.listBytes :15d}   |  {(stats.listBytes / entries[0][1].listBytes)  :.3f}x")
-            print(f"  set bytes:    {stats.setBytes  :15d}   |  {(stats.setBytes / entries[0][1].setBytes)    :.3f}x")
-            if not entries[0][1].valueBytes:
-                print(f"  value bytes:  {0:15d}")
-            else:
-                print(f"  value bytes:  {stats.valueBytes:15d}   |  {(stats.valueBytes / entries[0][1].valueBytes):.3f}x")
-            print(f"  heap alloc'd: {stats.heapBytes :15d}   |  {(stats.heapBytes / entries[0][1].heapBytes)  :.3f}x")
-            print(f"  heap size:    {stats.heapSize  :15d}   |  {(stats.heapSize / entries[0][1].heapSize)    :.3f}x")
-            print("\n")
-
-with tempfile.TemporaryDirectory() as tmp_dir:
-    subprocess.run([
-        "nix", "build",
-        "--extra-experimental-features", "nix-command flakes",
-        "--impure", "--expr",'(builtins.getFlake "git+file:.").inputs.nixpkgs.outPath',
-        "-o","bench/nixpkgs"
-    ], check=True)
-    subenv = os.environ.copy()
-    subenv["NIX_CONF_DIR"] = "/var/empty"
-    subenv["NIX_REMOTE"] = tmp_dir
-    subenv["NIX_PATH"] = ":".join([
-        "nixpkgs=bench/nixpkgs",
-    ])
-    subenv["NIX_DAEMON_SOCKET_PATH"] = f"{tmp_dir}/daemon"
-
-    for mode in args.mode:
-        if mode == "walltime":
-            bench_walltime(subenv)
-        elif mode == "memory":
-            bench_memory(subenv)
-        else:
-            bench_icount(subenv)
@@ -0,0 +1,62 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+shopt -s inherit_errexit
+
+scriptdir=$(cd "$(dirname -- "$0")" ; pwd -P)
+cd "$scriptdir/.."
+
+if [[ $# -lt 2 ]]; then
+    # FIXME(jade): it is a reasonable use case to want to run a benchmark run
+    # on just one build. However, since we are using hyperfine in comparison
+    # mode, we would have to combine the JSON ourselves to support that, which
+    # would probably be better done by writing a benchmarking script in
+    # not-bash.
+    echo "Fewer than two result dirs given, nothing to compare!" >&2
+    echo "Pass some directories (with names indicating which alternative they are) with bin/nix in them" >&2
+    echo "Usage: ./bench/bench.sh result-1 result-2 [result-3...]" >&2
+    exit 1
+fi
+
+_exit=""
+trap "$_exit" EXIT
+
+# XXX: yes this is very silly. flakes~!!
+nix build --impure --expr '(builtins.getFlake "git+file:.").inputs.nixpkgs.outPath' -o bench/nixpkgs
+
+export NIX_REMOTE="$(mktemp -d)"
+_exit='rm -rfv "$NIX_REMOTE"; $_exit'
+export NIX_PATH="nixpkgs=bench/nixpkgs:nixos-config=bench/configuration.nix"
+
+builds=("$@")
+
+flake_args="--extra-experimental-features 'nix-command flakes'"
+
+hyperfineArgs=(
+    --parameter-list BUILD "$(IFS=,; echo "${builds[*]}")"
+    --warmup 2 --runs 10
+)
+
+declare -A cases
+cases=(
+    [search]="{BUILD}/bin/nix $flake_args search --no-eval-cache github:nixos/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 hello"
+    [rebuild]="{BUILD}/bin/nix $flake_args eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'"
+    [rebuild-lh]="GC_INITIAL_HEAP_SIZE=10g {BUILD}/bin/nix eval $flake_args --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'"
+    [parse]="{BUILD}/bin/nix $flake_args eval -f bench/nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix"
+)
+
+benches=(
+    rebuild
+    rebuild-lh
+    search
+    parse
+)
+
+for k in "${benches[@]}"; do
+    taskset -c 2,3 \
+        chrt -f 50 \
+        hyperfine "${hyperfineArgs[@]}"  --export-json="bench/bench-${k}.json" --export-markdown="bench/bench-${k}.md" "${cases[$k]}"
+done
+
+echo "Benchmarks summary (from ./bench/summarize.jq bench/bench-*.json)"
+bench/summarize.jq bench/*.json
@@ -0,0 +1,325 @@
+{
+  config,
+  pkgs,
+  lib,
+  ...
+}:
+
+{
+  boot = {
+    initrd = {
+      availableKernelModules = [
+        "xhci_pci"
+        "ahci"
+      ];
+      kernelModules = [ "dm-snapshot" ];
+      luks.devices = {
+        croot = {
+          device = "/dev/sdb";
+          allowDiscards = true;
+        };
+      };
+    };
+    kernelModules = [ "kvm-intel" ];
+    kernelPackages = pkgs.linuxPackages_latest;
+
+    loader = {
+      systemd-boot.enable = true;
+      efi.canTouchEfiVariables = true;
+    };
+  };
+
+  hardware = {
+    enableRedistributableFirmware = true;
+    cpu.intel.updateMicrocode = true;
+    opengl.driSupport32Bit = true;
+    opengl.extraPackages = with pkgs; [
+      vaapiIntel
+      intel-media-driver
+      intel-compute-runtime
+    ];
+  };
+
+  fileSystems = {
+    "/" = {
+      device = "/dev/sda2";
+      fsType = "xfs";
+      options = [ "noatime" ];
+    };
+
+    "/boot" = {
+      device = "/dev/sda1";
+      fsType = "vfat";
+    };
+
+    "/nas" = {
+      device = "nas:/";
+      fsType = "nfs4";
+      options = [
+        "ro"
+        "x-systemd.automount"
+      ];
+    };
+  };
+  swapDevices = [ { device = "/dev/swap"; } ];
+
+  networking = {
+    useDHCP = false;
+    hostName = "host";
+    wireless = {
+      enable = true;
+      interfaces = [ "eth1" ];
+    };
+    interfaces = {
+      eth0.useDHCP = true;
+      eth1.useDHCP = true;
+    };
+    wg-quick.interfaces = {
+      wg0 = {
+        address = [ "2001:db8::1" ];
+        privateKeyFile = "/etc/secrets/wg0.key";
+        peers = [
+          {
+            publicKey = "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=";
+            endpoint = "[2001:db8::2]:61021";
+            allowedIPs = [ "2001::db8:1::/64" ];
+          }
+        ];
+      };
+    };
+
+    firewall.allowedUDPPorts = [ 4567 ];
+  };
+
+  i18n = {
+    defaultLocale = "en_US.UTF-8";
+    inputMethod.enabled = "ibus";
+  };
+
+  services = {
+    xserver = {
+      enable = true;
+      layout = "us";
+      xkbVariant = "altgr-intl";
+      xkbOptions = "ctrl:nocaps";
+      libinput.enable = true;
+      wacom.enable = true;
+      videoDrivers = [ "modesetting" ];
+      modules = [ pkgs.xf86_input_wacom ];
+
+      displayManager.sx.enable = true;
+      windowManager.i3.enable = true;
+    };
+
+    udev.extraHwdb = ''
+      # not like this mattered at all
+      # we're not running udev from here
+    '';
+
+    udev.extraRules = ''
+      # ACTION=="add", SUBSYSTEM=="input", ...
+    '';
+  };
+
+  sound.enable = true;
+  hardware.pulseaudio = {
+    enable = true;
+    package = pkgs.pulseaudioFull;
+    daemon.config = {
+      lock-memory = "yes";
+      realtime-scheduling = "yes";
+      rlimit-rtprio = "-1";
+    };
+  };
+
+  programs = {
+    light.enable = true;
+    wireshark = {
+      enable = true;
+      package = pkgs.wireshark-qt;
+    };
+    gnupg.agent = {
+      enable = true;
+    };
+  };
+
+  fonts.packages = with pkgs; [
+    font-awesome
+    noto-fonts
+    noto-fonts-cjk
+    noto-fonts-emoji
+    noto-fonts-extra
+    dejavu_fonts
+    powerline-fonts
+    source-code-pro
+    cantarell-fonts
+  ];
+
+  users = {
+    mutableUsers = false;
+
+    users = {
+      user = {
+        isNormalUser = true;
+        group = "user";
+        extraGroups = [
+          "wheel"
+          "video"
+          "audio"
+          "dialout"
+          "users"
+          "kvm"
+          "wireshark"
+        ];
+        password = "unimportant";
+      };
+    };
+
+    groups = {
+      user = { };
+    };
+  };
+
+  security = {
+    pam.loginLimits = [
+      {
+        domain = "@audio";
+        item = "memlock";
+        type = "-";
+        value = "unlimited";
+      }
+      {
+        domain = "@audio";
+        item = "rtprio";
+        type = "-";
+        value = "99";
+      }
+      {
+        domain = "@audio";
+        item = "nofile";
+        type = "soft";
+        value = "99999";
+      }
+      {
+        domain = "@audio";
+        item = "nofile";
+        type = "hard";
+        value = "99999";
+      }
+    ];
+
+    sudo.extraRules = [
+      {
+        users = [ "user" ];
+        commands = [
+          {
+            command = "${pkgs.linuxPackages.cpupower}/bin/cpupower";
+            options = [ "NOPASSWD" ];
+          }
+        ];
+      }
+    ];
+  };
+
+  environment.systemPackages = with pkgs; [
+    a2jmidid
+    age
+    ardour
+    bemenu
+    blender
+    breeze-icons
+    breeze-qt5
+    bubblewrap
+    calf
+    claws-mail
+    darktable
+    duperemove
+    emacs
+    feh
+    file
+    firefox
+    fluidsynth
+    gnome3.adwaita-icon-theme
+    gnuplot
+    graphviz
+    helm
+    i3status-rust
+    inkscape
+    jack2
+    jq
+    krita
+    ldns
+    libqalculate
+    libreoffice
+    man-pages
+    nheko
+    nix-diff
+    nix-index
+    nix-output-monitor
+    open-music-kontrollers.patchmatrix
+    pamixer
+    pavucontrol
+    pciutils
+    picom
+    pwgen
+    redshift
+    ripgrep
+    rlwrap
+    silver-searcher
+    soundfont-fluid
+    whois
+    wol
+    xclip
+    xdot
+    xdotool
+    xorg.xkbcomp
+    yt-dlp
+    zathura
+    borgbackup
+    linuxPackages.cpupower
+    mtr
+    kitty
+    xf86_input_wacom
+  ];
+
+  environment.pathsToLink = [ "/share/soundfonts" ];
+
+  systemd.user.services.run-python = {
+    after = [ "network-online.target" ];
+    script = ''
+      exec ${pkgs.python3}/bin/python
+    '';
+    serviceConfig = {
+      CapabilityBoundingSet = [ "" ];
+      KeyringMode = "private";
+      LockPersonality = true;
+      MemoryDenyWriteExecute = true;
+      NoNewPrivileges = true;
+      PrivateDevices = true;
+      PrivateTmp = true;
+      PrivateUsers = true;
+      ProcSubset = "pid";
+      ProtectClock = true;
+      ProtectControlGroups = true;
+      ProtectHome = true;
+      ProtectHostname = true;
+      ProtectKernelLogs = true;
+      ProtectKernelModules = true;
+      ProtectKernelTunables = true;
+      ProtectProc = "invisible";
+      ProtectSystem = "strict";
+      RestrictAddressFamilies = "AF_INET AF_INET6";
+      RestrictNamespaces = true;
+      RestrictRealtime = true;
+      RestrictSUIDSGID = true;
+      SystemCallArchitectures = "native";
+      SystemCallFilter = [
+        "@system-service"
+        "~ @resources @privileged"
+      ];
+      UMask = "077";
+    };
+  };
+
+  system.stateVersion = "23.11";
+}
@@ -0,0 +1,22 @@
+#!/usr/bin/env -S jq -Mrf
+
+def round3:
+    . * 1000 | round | . / 1000
+    ;
+
+def stats($first):
+    [
+        "  mean:     \(.mean | round3)s ± \(.stddev | round3)s",
+        "            user: \(.user | round3)s | system: \(.system | round3)s",
+        "  median:   \(.median | round3)s",
+        "  range:    \(.min | round3)s ... \(.max | round3)s",
+        "  relative: \(.mean / $first.mean | round3)"
+    ]
+    | join("\n")
+    ;
+
+def fmt($first):
+    "\(.command)\n" + (. | stats($first))
+    ;
+
+[.results | .[0] as $first | .[] | fmt($first)] | join("\n\n") | (. + "\n\n---\n")
@@ -1 +0,0 @@
-*
@@ -1,13 +0,0 @@
-plugin_mtls_store = shared_module(
-  'plugin_mtls_store',
-  'plugin_mtls_store.cc',
-  # don't link liblix* into plugins (host process provides them at runtime).
-  # Explicitly link curl so it binds to Nix-store libcurl, not /usr/lib/libcurl.
-  dependencies : [
-    liblix.partial_dependency(includes : true, compile_args : true),
-    curl,
-  ],
-  install : false,
-  build_by_default : true,
-  link_args : plugin_link_args,
-)
@@ -1,14 +0,0 @@
-R"(
-
-**Store URL format**: `https+mtls://...`
-
-This store allows a binary cache to be accessed via HTTPS with mutual TLS (client certificate authentication).
-
-Both parameters are required:
-
- `tls-certificate`, a path to the TLS client certificate
- `tls-private-key`, a path to the TLS private key backing the client certificate
-
-If you don't need mTLS, use `https://` instead.
-
-)"
@@ -1,102 +0,0 @@
-#include "lix/libstore/store-api.hh"
-#include "lix/libutil/config.hh"
-#include "lix/libstore/http-binary-cache-store.hh"
-#include <stdlib.h>
-#include <curl/curl.h>
-
-namespace nix {
-struct mTLSBinaryCacheStoreConfig : HttpBinaryCacheStoreConfig
-{
-    using HttpBinaryCacheStoreConfig::HttpBinaryCacheStoreConfig;
-
-    const std::string name() override
-    {
-        return "mTLS HTTP Binary Cache Store";
-    }
-
-    std::string doc() override
-    {
-        return
-#include "mtls-http-binary-cache-store.md"
-            ;
-    }
-
-    PathsSetting<nix::Path> tlsCertificate{
-        this,
-        "",
-        "tls-certificate",
-        "Path of the TLS client certificate in PEM format as expected by CURLOPT_SSLCERT"
-    };
-
-    PathsSetting<nix::Path> tlsKey{
-        this,
-        "",
-        "tls-private-key",
-        "Path of the TLS client certificate private key in PEM format as expected by CURLOPT_SSLKEY"
-    };
-};
-
-struct mTLSBinaryCacheStoreImpl : public HttpBinaryCacheStore
-{
-    struct Keyring
-    {
-        nix::Path tlsCertificate;
-        nix::Path tlsKey;
-    };
-
-    mTLSBinaryCacheStoreConfig config_;
-    std::shared_ptr<Keyring> keyring;
-
-    mTLSBinaryCacheStoreConfig & config() override
-    {
-        return config_;
-    }
-    const mTLSBinaryCacheStoreConfig & config() const override
-    {
-        return config_;
-    }
-
-    mTLSBinaryCacheStoreImpl(
-        const std::string & uriScheme, const Path & _cacheUri, mTLSBinaryCacheStoreConfig config
-    )
-        : Store(config)
-        , HttpBinaryCacheStore("https", _cacheUri, config)
-        , config_(std::move(config))
-        , keyring(std::make_shared<Keyring>(config_.tlsCertificate.get(), config_.tlsKey.get()))
-    {
-    }
-
-    FileTransferOptions makeOptions(Headers && headers = {}) override
-    {
-        auto options = HttpBinaryCacheStore::makeOptions(std::move(headers));
-        auto baseExtraSetup = std::move(options.extraSetup);
-        auto keyring = this->keyring;
-
-        options.extraSetup = [keyring, baseExtraSetup{std::move(baseExtraSetup)}](CURL * req) {
-            if (baseExtraSetup) {
-                baseExtraSetup(req);
-            }
-
-            const bool haveCert = !keyring->tlsCertificate.empty();
-            const bool haveKey = !keyring->tlsKey.empty();
-            if (!(haveCert && haveKey)) {
-                throw Error("https+mtls requires both tls-certificate and tls-private-key");
-            }
-            curl_easy_setopt(req, CURLOPT_SSLCERT, keyring->tlsCertificate.c_str());
-            curl_easy_setopt(req, CURLOPT_SSLKEY, keyring->tlsKey.c_str());
-        };
-
-        return options;
-    }
-
-    static std::set<std::string> uriSchemes()
-    {
-        return {"https+mtls"};
-    }
-};
-}
-
-extern "C" void nix_plugin_entry()
-{
-    nix::StoreImplementations::add<nix::mTLSBinaryCacheStoreImpl, nix::mTLSBinaryCacheStoreConfig>();
-}
@@ -1,15 +1,9 @@
-let
-  lockFile = builtins.fromJSON (builtins.readFile ./flake.lock);
-  flake-compat-node = lockFile.nodes.${lockFile.nodes.root.inputs.flake-compat};
-  flake-compat = builtins.fetchTarball {
-    inherit (flake-compat-node.locked) url;
-    sha256 = flake-compat-node.locked.narHash;
-  };
-
-  flake = (
-    import flake-compat {
-      src = ./.;
-    }
-  );
-in
-flake.defaultNix
+(import (
+  let
+    lock = builtins.fromJSON (builtins.readFile ./flake.lock);
+  in
+  fetchTarball {
+    url = "https://github.com/edolstra/flake-compat/archive/${lock.nodes.flake-compat.locked.rev}.tar.gz";
+    sha256 = lock.nodes.flake-compat.locked.narHash;
+  }
+) { src = ./.; }).defaultNix
@@ -1 +0,0 @@
-*
@@ -33,7 +33,32 @@ GENERATE_LATEX         = NO
 # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.

-INPUT                  = @INPUT_PATHS@
+# FIXME Make this list more maintainable somehow. We could maybe generate this
+# in the Makefile, but we would need to change how `.in` files are preprocessed
+# so they can expand variables despite configure variables.
+
+INPUT                  = \
+  src/libcmd \
+  src/libexpr \
+  src/libexpr/flake \
+  tests/unit/libexpr \
+  tests/unit/libexpr/value \
+  tests/unit/libexpr/test \
+  tests/unit/libexpr/test/value \
+  src/libexpr/value \
+  src/libfetchers \
+  src/libmain \
+  src/libstore \
+  src/libstore/build \
+  src/libstore/builtins \
+  tests/unit/libstore \
+  tests/unit/libstore/test \
+  src/libutil \
+  tests/unit/libutil \
+  tests/unit/libutil/test \
+  src/nix \
+  src/nix-env \
+  src/nix-store

 # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
 # in the source code. If set to NO, only conditional compilation will be
@@ -72,15 +97,3 @@ EXPAND_AS_DEFINED      = \
  DECLARE_WORKER_SERIALISER \
  DECLARE_SERVE_SERIALISER \
  LENGTH_PREFIXED_PROTO_HELPER
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        = "@PROJECT_SOURCE_ROOT@"
@@ -1,35 +1,3 @@
-internal_api_sources = [
-  'lix/libcmd',
-  'lix/libexpr',
-  'lix/libexpr/flake',
-  'tests/unit/libexpr',
-  'tests/unit/libexpr/value',
-  'tests/unit/libexpr/test',
-  'tests/unit/libexpr/test/value',
-  'lix/libexpr/value',
-  'lix/libfetchers',
-  'lix/libmain',
-  'lix/libstore',
-  'lix/libstore/build',
-  'lix/libstore/builtins',
-  'tests/unit/libstore',
-  'tests/unit/libstore/test',
-  'lix/libutil',
-  'tests/unit/libutil',
-  'tests/unit/libutil/test',
-  'lix/nix',
-  'lix/nix-env',
-  'lix/nix-store',
-]
-
-# We feed Doxygen absolute paths so it can be invoked from any working directory.
-internal_api_sources_absolute = []
-foreach src : internal_api_sources
-  internal_api_sources_absolute += '"' + (meson.project_source_root() / src) + '"'
-endforeach
-
-internal_api_sources_oneline = ' \\\n  '.join(internal_api_sources_absolute)
-
 doxygen_cfg = configure_file(
  input : 'doxygen.cfg.in',
  output : 'doxygen.cfg',
@@ -37,16 +5,22 @@ doxygen_cfg = configure_file(
    'PACKAGE_VERSION': meson.project_version(),
    'RAPIDCHECK_HEADERS': rapidcheck_meson.get_variable('includedir'),
    'docdir' : meson.current_build_dir(),
-    'INPUT_PATHS' : internal_api_sources_oneline,
-    'PROJECT_SOURCE_ROOT' : meson.project_source_root(),
  },
 )

 internal_api_docs = custom_target(
  'internal-api-docs',
  command : [
-    doxygen.full_path(),
-    '@INPUT0@',
+    bash,
+    # Meson can you please just give us a `workdir` argument to custom targets...
+    '-c',
+    # We have to prefix the doxygen_cfg path with the project build root
+    # because of the cd in front.
+    'cd @0@ && @1@ @2@/@INPUT0@'.format(
+      meson.project_source_root(),
+      doxygen.full_path(),
+      meson.project_build_root(),
+    ),
  ],
  input : [
    doxygen_cfg,
@@ -24,7 +24,8 @@ def map_contents_recursively(transformer):
 def process_command:
    .[0] as $context |
    .[1] as $body |
-	$body | .items |= map(map_contents_recursively(if $context.renderer == "html" then transform_anchors_html else transform_anchors_strip end))
-	;
+    $body + {
+        sections: $body.sections | map(map_contents_recursively(if $context.renderer == "html" then transform_anchors_html else transform_anchors_strip end)),
+    };

 process_command
@@ -7,8 +7,9 @@ create-missing = false
 [output.html]
 additional-css = ["custom.css"]
 additional-js = ["redirects.js"]
-# Jumps directly into a new Gerrit CL editing the file in question.
-edit-url-template = "https://gerrit.lix.systems/admin/repos/edit/repo/lix/branch/main/file/doc/manual/{path}"
+# Using our GitHub mirror enables easier typo fixes since there is no easy way
+# to just submit a Gerrit CL by the web for trivial stuff.
+edit-url-template = "https://github.com/lix-project/lix/tree/main/doc/manual/{path}"
 git-repository-url = "https://git.lix.systems/lix-project/lix"
 # Folding by default would prevent things like "Ctrl+F for nix-env" from working
 # trivially, but the user should be able to fold if they want to.
@@ -22,16 +23,16 @@ fold.level = 30
 # not want to disable the links preprocessor entirely though because that requires
 # disabling *all* built-in preprocessors and selectively reenabling those we want.
 [preprocessor.substitute]
-command = "python3 substitute.py"
+command = "python3 doc/manual/substitute.py"
 before = ["anchors", "links"]

 [preprocessor.anchors]
 renderers = ["html"]
-command = "jq --from-file anchors.jq"
+command = "jq --from-file doc/manual/anchors.jq"

 [output.markdown]

-[output.linkcheck2]
+[output.linkcheck]
 # no Internet during the build (in the sandbox)
 follow-web-links = false

@@ -12,10 +12,6 @@
  forgejo: rbt
  github: 9999years

-9p4:
-  display_name: Ersei Saggi
-  github: 9p4
-
 Artturin:
  github: Artturin

@@ -40,32 +36,10 @@ alois31:
  forgejo: alois31
  github: alois31

-andrewhamon:
-  display_name: Andrew Hamon
-  github: andrewhamon
-
 artemist:
  display_name: Artemis Tosini
  forgejo: artemist

-astreaprtcl:
-  display_name: Astreaprtcl
-  forgejo: astreaprtcl
-  github: astreaprtcl
-
-bb010g:
-  display_name: Dusk Banks
-  forgejo: bb010g
-  github: bb010g
-
-blitz:
-  display_name: Julian Stecklina
-  github: blitz
-
-blokyk:
-  display_name: blokyk
-  github: blokyk
-
 cole-h:
  display_name: Cole Helbling
  github: cole-h
@@ -75,45 +49,19 @@ delan:
  forgejo: delan
  github: delan

-delroth:
-  github: delroth
-
-detroyejr:
-  display_name: Jonathan De Troye
-  github: detroyejr
-
-edef:
-  github: edef1c
-
 edolstra:
  display_name: Eelco Dolstra
  github: edolstra

-emilazy:
-  display_name: Emily
-  forgejo: emilazy
-  github: emilazy
-
 ericson:
  display_name: John Ericson
  github: ericson2314

-getchoo:
-  display_name: Seth Flynn
-  forgejo: getchoo
-  github: getchoo
-
-gilice:
-  forgejo: gilice
-
 goldstein:
  display_name: goldstein
  forgejo: goldstein
  github: GoldsteinE

-gustavderdrache:
-  github: gustavderdrache
-
 horrors:
  display_name: eldritch horrors
  forgejo: pennae
@@ -122,13 +70,6 @@ horrors:
 iFreilicht:
  github: iFreilicht

-ian-h-chamberlain:
-  forgejo: ian-h-chamberlain
-  github: ian-h-chamberlain
-
-infinisil:
-  github: infinisil
-
 isabelroses:
  forgejo: isabelroses
  github: isabelroses
@@ -137,50 +78,13 @@ jade:
  forgejo: jade
  github: lf-

-just1602:
-  forgejo: just1602
-
-k900:
-  display_name: K900
-  forgejo: K900
-  github: K900
-
-kasimeka:
-  display_name: ورد
-  forgejo: janw4ld
-  github: kasimeka
-
-keysmashes:
-  github: keysmashes
-
-kfears:
-  display_name: KFears
-  forgejo: kfearsoff
-  github: kfearsoff
-
-kiara:
-  github: KiaraGrouwstra
-
 kjeremy:
  github: kjeremy

 kloenk:
-  display_name: Fiona Behrens
  forgejo: kloenk
  github: kloenk

-lheckemann:
-  forgejo: lheckemann
-  github: lheckemann
-
-lily:
-  forgejo: lilyinstarlight
-  github: lilyinstarlight
-
-lilyball:
-  forgejo: lilyball
-  github: lilyball
-
 lovesegfault:
  github: lovesegfault

@@ -191,59 +95,24 @@ ma27:
 matthewbauer:
  github: matthewbauer

-mic92:
-  github: mic92
-
 midnightveil:
  display_name: julia
  forgejo: midnightveil
  github: midnightveil

-milibopp:
-  display_name: Emilia Bopp
-  forgejo: milibopp
-  github: milibopp
-
-nan-git:
-  display_name: NaN-git
-  github: NaN-git
-
 ncfavier:
  github: ncfavier

-nkk0:
-  github: nkk0
-
-not-my-profile:
-  display_name: Martin Fischer
-  github: not-my-profile
-
-p-e-meunier:
-  display_name: Pierre-Etienne Meunier
-  github: P-E-Meunier
-
-pamplemousse:
-  display_name: Xavier Maso
-  github: pamplemousse
-
 piegames:
  display_name: piegames
  forgejo: piegames
  github: piegamesde

-poliorcetics:
-  display_name: Poliorcetics
-  github: poliorcetics
-
 puck:
  display_name: puck
  forgejo: puck
  github: puckipedia

-quantenzitrone:
-  display_name: Zitrone
-  forgejo: quantenzitrone
-
 quantumjump:
  display_name: Quantum Jump
  github: QuantumBJump
@@ -256,41 +125,10 @@ raito:
  forgejo: raito
  github: RaitoBezarius

-rkjnsn:
-  display_name: Erik Jensen
-  forgejo: rkjnsn
-  github: rkjnsn
-
 roberth:
  display_name: Robert Hensing
  github: roberth

-rootile:
-  display_name: rootile (Rutile)
-  forgejo: rootile
-
-sandydoo:
-  github: sandydoo
-
-seppel3210:
-  github: Seppel3210
-
-sterni:
-  forgejo: sterni
-  github: sternenseemann
-
-stevalkr:
-  github: stevalkr
-
-teofilc:
-  forgejo: teofilc
-  github: TeofilC
-
-thubrecht:
-  display_name: Tom Hubrecht
-  forgejo: tom-hubrecht
-  github: Tom-Hubrecht
-
 thufschmitt:
  display_name: Théophane Hufschmitt
  github: thufschmitt
@@ -303,41 +141,9 @@ valentin:
  display_name: Valentin Gagarin
  github: fricklerhandwerk

-vigress8:
-  display_name: Vigress
-  forgejo: vigress8
-  github: vigress8
-
-vlaci:
-  github: vlaci
-
-vlinkz:
-  display_name: Victor Fuentes
-  forgejo: vlinkz
-  github: vlinkz
-
 winter:
  forgejo: winter
  github: winterqt

-xanderio:
-  github: xanderio
-
-xokdvium:
-  github: xokdvium
-
-xyenon:
-  forgejo: xyenon
-  github: xyenon
-
-yorickvp:
-  github: yorickvp
-
 yshui:
  github: yshui
-
-ysndr:
-  github: ysndr
-
-zimbatm:
-  github: zimbatm
@@ -0,0 +1,37 @@
+let
+  inherit (builtins) concatStringsSep attrValues mapAttrs;
+  inherit (import ./utils.nix) optionalString squash;
+in
+
+builtinsInfo:
+let
+  showBuiltin =
+    name:
+    {
+      doc,
+      type,
+      impure-only,
+    }:
+    let
+      type' = optionalString (type != null) " (${type})";
+
+      impureNotice = optionalString impure-only ''
+        > **Note**
+        >
+        > Not available in [pure evaluation mode](@docroot@/command-ref/conf-file.md#conf-pure-eval).
+      '';
+    in
+    squash ''
+      <dt id="builtins-${name}">
+        <a href="#builtins-${name}"><code>${name}</code></a>${type'}
+      </dt>
+      <dd>
+
+      ${doc}
+
+      ${impureNotice}
+
+      </dd>
+    '';
+in
+concatStringsSep "\n" (attrValues (mapAttrs showBuiltin builtinsInfo))
@@ -0,0 +1,35 @@
+let
+  inherit (builtins) concatStringsSep attrValues mapAttrs;
+  inherit (import ./utils.nix) optionalString squash;
+in
+
+builtinsInfo:
+let
+  showBuiltin =
+    name:
+    {
+      doc,
+      args,
+      arity,
+      experimental-feature,
+    }:
+    let
+      experimentalNotice = optionalString (experimental-feature != null) ''
+        This function is only available if the [${experimental-feature}](@docroot@/contributing/experimental-features.md#xp-feature-${experimental-feature}) experimental feature is enabled.
+      '';
+    in
+    squash ''
+      <dt id="builtins-${name}">
+        <a href="#builtins-${name}"><code>${name} ${listArgs args}</code></a>
+      </dt>
+      <dd>
+
+      ${doc}
+
+      ${experimentalNotice}
+
+      </dd>
+    '';
+  listArgs = args: concatStringsSep " " (map (s: "<var>${s}</var>") args);
+in
+concatStringsSep "\n" (attrValues (mapAttrs showBuiltin builtinsInfo))
@@ -0,0 +1,14 @@
+# Usually "experimental" or "deprecated"
+kind:
+# "xp" or "dp"
+kindShort:
+
+with builtins;
+with import ./utils.nix;
+
+let
+  showExperimentalFeature = name: doc: ''
+    - [`${name}`](@docroot@/contributing/${kind}-features.md#${kindShort}-feature-${name})
+  '';
+in
+xps: indent "  " (concatStrings (attrValues (mapAttrs showExperimentalFeature xps)))
@@ -0,0 +1,18 @@
+# Usually "experimental" or "deprecated"
+_kind:
+# "xp" or "dp"
+kindShort:
+
+with builtins;
+with import ./utils.nix;
+
+let
+  showFeature =
+    name: doc:
+    squash ''
+      ## [`${name}`]{#${kindShort}-feature-${name}}
+
+      ${doc}
+    '';
+in
+xps: (concatStringsSep "\n" (attrValues (mapAttrs showFeature xps)))
@@ -1,134 +1,26 @@
-with builtins;
-
 let
-  splitLines = s: filter (x: !isList x) (split "\n" s);
-
-  concatStrings = concatStringsSep "";
-
-  replaceStringsRec =
-    from: to: string:
-    # recursively replace occurrences of `from` with `to` within `string`
-    # example:
-    #     replaceStringRec "--" "-" "hello-----world"
-    #     => "hello-world"
-    let
-      replaced = replaceStrings [ from ] [ to ] string;
-    in
-    if replaced == string then string else replaceStringsRec from to replaced;
-
-  squash = replaceStringsRec "\n\n\n" "\n\n";
-
-  trim =
-    string:
-    # trim trailing spaces and squash non-leading spaces
-    let
-      trimLine =
-        line:
-        let
-          # separate leading spaces from the rest
-          parts = split "(^ *)" line;
-          spaces = head (elemAt parts 1);
-          rest = elemAt parts 2;
-          # drop trailing spaces
-          body = head (split " *$" rest);
-        in
-        spaces + replaceStringsRec "  " " " body;
-    in
-    concatStringsSep "\n" (map trimLine (splitLines string));
-
-  # FIXME: O(n^2)
-  unique = foldl' (acc: e: if elem e acc then acc else acc ++ [ e ]) [ ];
-
-  nameValuePair = name: value: { inherit name value; };
-
-  filterAttrs =
-    pred: set:
-    listToAttrs (
-      concatMap (
-        name:
-        let
-          v = set.${name};
-        in
-        if pred name v then [ (nameValuePair name v) ] else [ ]
-      ) (attrNames set)
-    );
-
-  optionalString = cond: string: if cond then string else "";
-
-  showSetting =
-    { inlineHTML }:
-    name:
-    {
-      description,
-      documentDefault,
-      defaultValue,
-      aliases,
-      value,
-      experimentalFeature,
-    }:
-    let
-      result = squash ''
-        - ${
-          if inlineHTML then ''<span id="conf-${name}">[`${name}`](#conf-${name})</span>'' else "`${name}`"
-        }
-
-        ${indent "  " body}
-      '';
-
-      experimentalFeatureNote = optionalString (experimentalFeature != null) ''
-        > **Warning**
-        > This setting is part of an
-        > [experimental feature](@docroot@/contributing/experimental-features.md).
-
-        To change this setting, you need to make sure the corresponding experimental feature,
-        [`${experimentalFeature}`](@docroot@/contributing/experimental-features.md#xp-feature-${experimentalFeature}),
-        is enabled.
-        For example, include the following in [`nix.conf`](#):
-
-        ```
-        extra-experimental-features = ${experimentalFeature}
-        ${name} = ...
-        ```
-      '';
-
-      # separate body to cleanly handle indentation
-      body = ''
-        ${description}
-
-        ${experimentalFeatureNote}
-
-        **Default:** ${showDefault documentDefault defaultValue}
-
-        ${showAliases aliases}
-      '';
-
-      showDefault =
-        documentDefault: defaultValue:
-        if documentDefault then
-          # a StringMap value type is specified as a string, but
-          # this shows the value type. The empty stringmap is `null` in
-          # JSON, but that converts to `{ }` here.
-          if defaultValue == "" || defaultValue == [ ] || isAttrs defaultValue then
-            "*empty*"
-          else if isBool defaultValue then
-            if defaultValue then "`true`" else "`false`"
-          else
-            "`${toString defaultValue}`"
-        else
-          "*machine-specific*";
-
-      showAliases =
-        aliases:
-        optionalString (aliases != [ ])
-          "**Deprecated alias:** ${(concatStringsSep ", " (map (s: "`${s}`") aliases))}";
-    in
-    result;
-
-  indent =
-    prefix: s: concatStringsSep "\n" (map (x: if x == "" then x else "${prefix}${x}") (splitLines s));
-
-  showSettings =
-    args: settingsInfo: concatStrings (attrValues (mapAttrs (showSetting args) settingsInfo));
+  inherit (builtins)
+    attrNames
+    attrValues
+    fromJSON
+    listToAttrs
+    mapAttrs
+    concatStringsSep
+    concatMap
+    length
+    lessThan
+    replaceStrings
+    sort
+    ;
+  inherit (import ./utils.nix)
+    concatStrings
+    optionalString
+    filterAttrs
+    trim
+    squash
+    unique
+    showSettings
+    ;
 in

 inlineHTML: commandDump:
@@ -225,7 +117,7 @@ let
          showCategory = cat: ''
            ${optionalString (cat != "") "**${cat}:**"}

-            ${listOptions (filterAttrs (n: v: v.category == cat && !v.hidden) allOptions)}
+            ${listOptions (filterAttrs (n: v: v.category == cat) allOptions)}
          '';
          listOptions = opts: concatStringsSep "\n" (attrValues (mapAttrs showOption opts));
          showOption =
@@ -1,7 +1,6 @@
 nix_env_for_docs = {
  'HOME': '/dummy',
  'NIX_CONF_DIR': '/dummy',
-  'XDG_CONFIG_HOME': '/dummy',
  'NIX_SSL_CERT_FILE': '/dummy/no-ca-bundle.crt',
  'NIX_STATE_DIR': '/dummy',
  'NIX_CONFIG': 'cores = 0',
@@ -16,6 +15,56 @@ nix_eval_for_docs_common = nix_for_docs + [
 ]
 nix_eval_for_docs = nix_eval_for_docs_common + '--raw'

+conf_file_json = custom_target(
+  command : nix_for_docs + [ 'show-config', '--json' ],
+  capture : true,
+  output : 'conf-file.json',
+  env : nix_env_for_docs,
+  # FIXME: put the actual lib targets in here? meson have introspection challenge 2024 though.
+  build_always_stale : true,
+)
+
+nix_conf_file_md_body = custom_target(
+  command : nix_eval_for_docs + [
+    '--expr',
+    '(import @INPUT0@).showSettings { inlineHTML = true; } (builtins.fromJSON (builtins.readFile @INPUT1@))',
+  ],
+  capture : true,
+  input : [
+    'utils.nix',
+    conf_file_json,
+  ],
+  output : 'conf-file.md.body',
+  env : nix_env_for_docs,
+)
+
+nix_conf_file_md = custom_target(
+  command : [ 'cat', '@INPUT@' ],
+  capture : true,
+  input : [
+    'src/command-ref/conf-file.md',
+    nix_conf_file_md_body,
+  ],
+  output : 'conf-file.md',
+)
+
+nix_exp_features_json = custom_target(
+  command : [ nix, '__dump-xp-features' ],
+  capture : true,
+  output : 'xp-features.json',
+  # FIXME: put the actual lib targets in here? meson have introspection challenge 2024 though.
+  build_always_stale : true,
+)
+
+language_json = custom_target(
+  command: [nix, '__dump-language'],
+  output : 'language.json',
+  capture : true,
+  env : nix_env_for_docs,
+  # FIXME: put the actual lib targets in here? meson have introspection challenge 2024 though.
+  build_always_stale : true,
+)
+
 nix3_cli_json = custom_target(
  command : [ nix, '__dump-cli' ],
  capture : true,
@@ -29,8 +78,12 @@ generate_manual_deps = files(
  'generate-deps.py',
 )

-# Generates new-cli pages  and conf-file.md.
+# Generates builtins.md and builtin-constants.md.
+subdir('src/language')
+# Generates new-cli pages, {experimental,deprecated}-features-shortlist.md, and conf-file.md.
 subdir('src/command-ref')
+# Generates {experimental,deprecated}-feature-descriptions.md.
+subdir('src/contributing')
 # Generates rl-next-generated.md.
 subdir('src/release-notes')

@@ -41,13 +94,9 @@ manual = custom_target(
    '-euo', 'pipefail',
    '-c',
    '''
-        @0@ @INPUT0@ @3@ > @DEPFILE@
-
-        # Needs to be in lix/doc/manual for e.g. substitute.py
-        pushd @3@
-        @1@ build . -d @2@
-        popd
-
+        @0@ @INPUT0@ @CURRENT_SOURCE_DIR@ > @DEPFILE@
+        cd @SOURCE_ROOT@
+        @1@ build doc/manual -d @2@ | { grep -Fv "because fragment resolution isn't implemented" || :; }
        rm -rf @2@/manual
        mv @2@/html @2@/manual
        find @2@/manual -iname meson.build -delete
@@ -55,7 +104,6 @@ manual = custom_target(
      python.full_path(),
      mdbook.full_path(),
      meson.current_build_dir(),
-      meson.current_source_dir()
    ),
  ],
  input : [
@@ -78,19 +126,20 @@ manual = custom_target(
    'manual',
    'markdown',
  ],
-  install : true,
-  install_dir : [
-    datadir / 'doc/nix',
-    false,
-  ],
  depfile : 'manual.d',
  env : {
    'RUST_LOG': 'info',
-    'MANUAL_SUBSTITUTE_SEARCH': meson.current_build_dir() / 'src',
+    'MDBOOK_SUBSTITUTE_SEARCH': meson.current_build_dir() / 'src',
  },
 )
+manual_html = manual[0]
 manual_md = manual[1]

+install_subdir(
+  manual_html.full_path(),
+  install_dir : datadir / 'doc/nix',
+)
+
 nix_nested_manpages = [
  [ 'nix-env',
    [
@@ -0,0 +1,21 @@
+---
+synopsis: "Build failures caused by `allowSubstitutes = false` while being the wrong system now produce a decent error"
+issues: [fj#484]
+cls: [1841]
+category: Fixes
+credits: jade
+---
+
+Nix allows derivations to set `allowSubstitutes = false` in order to force them to be built locally without querying substituters for them.
+This is useful for derivations that are very fast to build (especially if they produce large output).
+However, this can shoot you in the foot if the derivation *has* to be substituted such as if the derivation is for another architecture, which is what `--always-allow-substitutes` is for.
+
+Perhaps such derivations that are known to be impossible to build locally should ignore `allowSubstitutes` (irrespective of remote builders) in the future, but this at least reports the failure and solution directly.
+
+```
+$ nix build -f fail.nix
+error: a 'unicornsandrainbows-linux' with features {} is required to build '/nix/store/...-meow.drv', but I am a 'x86_64-linux' with features {...}
+
+       Hint: the failing derivation has allowSubstitutes set to false, forcing it to be built rather than substituted.
+       Passing --always-allow-substitutes to force substitution may resolve this failure if the path is available in a substituter.
+```
@@ -1,10 +0,0 @@
---
-synopsis: "allow setting nested attributes via `--arg`/`--argstr`"
-cls: [5338]
-category: "Features"
-credits: [ma27]
-issues: [fj#496]
---
-
-Passing `--arg config.allowUnfree true` to e.g. `nix-build` now results in `config` with value
-`{ allowUnfree = true; }` passed to the expression.
@@ -1,9 +0,0 @@
---
-synopsis: "check for missing ca-file or netrc-file if one is specified"
-cls: [5646]
-category: "Improvements"
-credits: [astreaprtcl]
-issues: [fj#1106]
---
-
-If the settings `ssl-cert-file` or `netrc-file` have been set by the user, check if those files actually exist and fail if they are missing.
@@ -0,0 +1,17 @@
+---
+synopsis: Deprecated language features
+issues: [fj#437]
+cls: [1785, 1736, 1735, 1744]
+category: Breaking Changes
+credits: [piegames, horrors]
+---
+
+A system for deprecation (and then the planned removal) of undesired language features has been put into place.
+It is controlled via feature flags much like experimental features, except that the deprecations are enabled default,
+and can be disabled via the flags for backwards compatibility (opt-out with `--extra-deprecated-features` or the Nix configuration file).
+
+- `url-literals`: **URL literals** have long been obsolete and discouraged of use, and now they are officially deprecated.
+  This means that all URLs must be properly put within quotes like all other strings.
+- `rec-set-overrides`: **__overrides** is an old arcane syntax which has not been in use for more than a decade.
+  It is soft-deprecated with a warning only, with the plan to turn that into an error in a future release.
+- `ancient-let`: **The old `let` syntax** (`let { body = …; … }`) is soft-deprecated with a warning as well. Use the regular `let … in` instead.
@@ -1,10 +0,0 @@
---
-synopsis: "libexpr: allow empty attr-names in parseAttrPath if they are quoted"
-cls: [5375]
-category: "Miscellany"
-credits: [ma27]
---
-
-Empty strings are now allowed in attribute paths as consumed by e.g. `nix-build`.
-I.e. `nix-build -A 'foo."".bar'` works now.
-The quotes are necessary, i.e. `nix-build -A foo..bar` will throw an error.
@@ -1,10 +0,0 @@
---
-synopsis: "don't treat tarball fetches with empty or zero hash as locked"
-cls: []
-category: "Fixes"
-credits: [horrors]
-issues: [fj#1233]
---
-
-Lix no longer treats tarball fetches with empty or zero hashes as locked.
-All such fetches are now also affected by `tarball-ttl` as a consequence.
@@ -1,13 +0,0 @@
---
-synopsis: builtins.floor/builtins.ceil handle out-of-range inputs correctly
-issues: [nix#12899]
-cls: [3923]
-prs: [nix#13013]
-category: "Breaking Changes"
-credits: [jade, nan-git, rootile]
---
-Previously, `builtins.floor` and `builtins.ceil` always cast the input into a floating point value before running the operation and casting the floating point result back into an integer.
-No checks were made for precision loss in either coercing integer inputs or converting the output to an integer (and in fact in the latter case, invoked undefined behaviour).
-
-Now, Lix checks for precision loss on integer input (to avoid a silent eval semantics change if we were to simply pass it through as-is) and on integer output.
-If your code fails to evaluate after this change, use `--extra-deprecated-features floor-ceil-corrupt-integers`.
@@ -0,0 +1,10 @@
+---
+synopsis: HTTP proxy environment variables are now respected for S3 binary cache stores
+issues: [fj#433]
+cls: [1788]
+category: Fixes
+credits: jade
+---
+
+Due to "legacy reasons" (according to the AWS C++ SDK docs), the AWS SDK ignores system proxy configuration by default.
+We turned it back on.
@@ -1,14 +0,0 @@
---
-synopsis: "builtins.break doesn't break expression anymore"
-issues: [1165]
-cls: [5422]
-category: "Fixes"
-credits: [blokyk]
---
-
-Wrapping an expression in `builtins.break` used to break some builtins like
-`map` and the `is*` functions, which could modify the execution path of code
-inadvertently, made debugging nix harder than it already is, and in some cases
-even crashed the interpreter. Now, using `break` should be completely
-transparent to whatever function receives it as an input, preventing the
-above-mentioned issues.
@@ -1,9 +0,0 @@
---
-synopsis: "flake config warnings are now printed to stderr"
-issues: [1155]
-cls: [5379]
-category: "Fixes"
-credits: [lheckemann]
---
-
-The settings listed in a flake-config confirmation prompt are now printed to stderr rather than stdout, which allows `nix print-dev-env` to emit valid bash again even in the presence of untrusted settings.
@@ -1,21 +0,0 @@
---
-synopsis: "Use a lock when fetching inputs"
-issues: [1122]
-cls: [5438]
-category: "Fixes"
-credits: [lheckemann]
---
-
-Up to now, attempting to fetch the same git input from multiple processes
-concurrently when the input is not yet cached presented multiple issues:
-
- If the input was not already present, it would unnecessarily be fetched
-  multiple times;
-
- Access to the fetcher cache database was contentious, and could lead to
-  evaluation or flake locking failing unnecessary because the fetcher cache
-  was locked.
-
-We now acquire a lock on a path based on a hash of the input specification
-before accessing the fetcher db, reducing contention significantly, and
-preventing more than one process from fetching the same path at the same time.
@@ -1,16 +0,0 @@
---
-synopsis: "Use mimalloc for faster evaluation"
-cls: [5645]
-category: Features
-credits: [getchoo, lovesegfault]
---
-
-Lix now links with [mimalloc](https://github.com/microsoft/mimalloc),
-replacing the system's default `malloc()` for all non-GC allocations.
-
-This yields a **5–12% wall-clock improvement** on evaluation workloads,
-ranging from `nix-instantiate hello` to `nix-env -qa` and full NixOS
-configurations.
-
-The allocator can be disabled at build time with `-Dmimalloc=disabled`,
-or by passing the `useMimalloc = false` override to the `lix` package.
@@ -1,10 +0,0 @@
---
-synopsis: "Lix now requires lowdown 1.4.0 or later"
-issues: []
-cls: [5374]
-category: Packaging
-credits: [sterni]
---
-
-Support for linking against `lowdown < 1.4.0` has been removed from Lix since
-all supported Nixpkgs channels distribute lowdown 2.0.4 or later.
@@ -1,12 +0,0 @@
---
-synopsis: "nix-eval-jobs support `--apply` flag"
-cls: [5748]
-category: "Features"
-credits: [isabelroses,mic92,ysndr]
-issues: [fj#1214]
---
-
-`nix-eval-jobs` now supports the `--apply` flag. With this you can apply the
-provided function to the each derivation, the result of this function will then
-be serialized as a JSON value and stored inside `"extraValue"` key of the json
-line output.
@@ -1,10 +0,0 @@
---
-synopsis: "Fix `nix-copy-closure --include-outputs`"
-issues: [gh#5105]
-cls: [5588]
-category: "Fixes"
-credits: [rkjnsn]
---
-
-The `--include-outputs` flag for `nix-copy-closure` now works as intended.
-Previously, the option was accepted but silently ignored.
@@ -1,14 +0,0 @@
---
-synopsis: "Improve nix doctor"
-cls: [5316, 5317, 5318, 5319, 5320, 5768, 5829]
-category: Features
-credits: [rootile, raito]
---
-The `nix doctor` diagnosics interface now provides a lot more useful information including, but not limited to:
- General system information (OS, Hardware etc)
- Nix Information like Sandbox, Version, Store, State and other directories
- Flake registry
- Search path Information
- Nixpkgs provenance
- Remote builder configuration (including remote connection)
- fix crash when having relative Paths in PATH
@@ -1,11 +0,0 @@
---
-synopsis: "Shadowing internal files through the Nix search path is now an error"
-issues: [998]
-cls: [4632, 5370]
-category: "Breaking Changes"
-credits: [thubrecht, jade, horrors]
---
-
-As Lix uses the path `<nix/fetchurl.nix>` for bootstrapping purposes, the ability to shadow it by adding `nix=/some/path` (or `/other/path` that contains a `nix` directory) to the search path is not desirable.
-
-Lix 2.95 deprecated this behavior with a warning, Lix 2.96 now turns it into a hard error if the `nix-path-shadow` deprecated feature isn't enabled. This deprecated feature is slated to be removed in Lix 2.98.
@@ -1,11 +0,0 @@
---
-synopsis: "Remove `max-connections` store parameters for `ssh://` and `ssh-ng://` stores"
-cls: []
-category: Miscellany
-credits: [horrors]
---
-
-The `max-connections` parameter was undocumented, untested, and (in the case of `ssh`) even ignored
-entirely for remote builds. During a survey of public nixos configurations we have found *two* uses
-of `max-connections` for `ssh-ng`, and none at all for `ssh`. Since it is so rarely used but brings
-significant internal complexity that hinders improvements we have decided to remove these features.
@@ -0,0 +1,30 @@
+---
+synopsis: Relative and tilde paths in configuration
+issues: [fj#482]
+cls: [1851, 1863, 1864]
+category: Features
+credits: [9999years]
+---
+
+[Configuration settings](@docroot@/command-ref/conf-file.md) can now refer to
+files with paths relative to the file they're written in or relative to your
+home directory (with `~/`).
+
+This makes settings like
+[`repl-overlays`](@docroot@/command-ref/conf-file.md#conf-repl-overlays) and
+[`secret-key-files`](@docroot@/command-ref/conf-file.md#conf-repl-overlays)
+much easier to set, especially if you'd like to refer to files in an existing
+dotfiles repo cloned into your home directory.
+
+If you put `repl-overlays = repl.nix` in your `~/.config/nix/nix.conf`, it'll
+load `~/.config/nix/repl.nix`. Similarly, you can set `repl-overlays =
+~/.dotfiles/repl.nix` to load a file relative to your home directory.
+
+Configuration files can also
+[`include`](@docroot@/command-ref/conf-file.md#file-format) paths relative to
+your home directory.
+
+Only user configuration files (like `$XDG_CONFIG_HOME/nix/nix.conf` or the
+files listed in `$NIX_USER_CONF_FILES`) can use tilde paths relative to your
+home directory. Configuration listed in the `$NIX_CONFIG` environment variable
+may not use relative paths.
@@ -1,18 +0,0 @@
---
-synopsis: "Allow moving between stack frames relative to current debugger frame"
-issues: [1156]
-cls: [5411]
-category: "Improvements"
-credits: [blokyk]
---
-
-Debugging functional programs often involve switching between a bunch of stack
-frames to get the full context of what's happening and who's calling who.
-Before this change, going up or down the stack in the nix debugger with `:st`
-meant remembering the absolute index of each stack frame, instead of their
-positions relative to one another; this got tiring *fast*.
-
-Now, you can prepend `:st`'s argument with a + or - sign to indicate you want to
-move relative to the current stack frame. For example, typing `:st +3` when you
-were on frame `10` will go frame `13`; vice-versa, typing `:st -4` on frame `6`
-will go to frame `2`.
@@ -1,17 +0,0 @@
---
-synopsis: "Print REPL backtraces in more convenient order"
-issues: []
-cls: [5491]
-category: "Improvements"
-credits: [blokyk]
---
-
-When using the debugger, stack traces printed with the `:bt` command were
-previously printed in reverse order compared to most other situations where they
-appeared: the current stack frame would be printed at the very top, with the
-most outer frame at the bottom, meaning that you'd have to scroll up to get a
-sense of where you are.
-
-With this change, the stack frames are printed such that the most relevant ones
-are immediatly visible at the bottom, just like other traces in lix (e.g.
-ones caused by errors).
@@ -1,14 +0,0 @@
---
-synopsis: "invalid arguments to :st now print an error"
-cls: [5386]
-category: "Improvements"
-credits: [blokyk]
---
-
-When using the debugger, the `:st` command used to traverse the call stack would
-silently fail and put the debugger in an invalid state if the argument given to
-it wasn't a valid stack frame index.
-
-This change adds an error message warning the user if the given index wasn't a
-valid frame (telling them the range of valid indices), as well as if it wasn't
-even a valid integer to begin with.
@@ -1,12 +0,0 @@
---
-synopsis: "REPL now uses rustyline"
-cls: [5703]
-category: "Improvements"
-credits: [horrors]
-issues: []
---
-
-The REPL now uses [rustyline](https://github.com/kkawakam/rustyline) for input processing instead
-of editline. This comes with some improvements to REPL behavior: wrapping lines no longer confuse
-the line editor, unicode is fully supported, pasting multiline expressions is noew possible, even
-undo commands are now available! We plan to improve the REPL further using these newfound powers.
@@ -1,11 +0,0 @@
---
-synopsis: "Hash mismatch diagnostics now work with `structuredAttrs`"
-issues: [fj#1175]
-cls: [5441]
-category: Fixes
-credits: [keysmashes]
---
-
-Nixpkgs fetchers like `fetchurl` now use `structuredAttrs`, which broke the
-hash mismatch diagnostics added in Lix 2.91. This has been fixed and the likely
-URL is now shown again.
@@ -1,18 +0,0 @@
---
-synopsis: "Changes to `flake.nix` validation"
-cls: [5523]
-category: "Breaking Changes"
-credits: [piegames, Qyriad, horrors]
-issues: [gh#4945]
---
-
-Flakes try to keep their inputs and metadata "simple", to make sure no unbounded computation may happen when calling e.g. `nix flake show`.
-Those checks were haphazard, a maintenance burden, and also easily circumventable.
-
-Lix has now replaced all the old checks by a simple rule: **No function calls outside of `outputs`.**
-This is easier to reason about than the previous set of inconsistent rules, and crucially now also allows syntax features that users felt like they *should* have worked in the past, like let bindings.
-However, some warts still remain for now: Some syntax constructs like `-1` internally desugar to `__sub 0 1`, which is a function call and thus remains forbidden.
-This will be rectified as soon as the deprecation period of the respective anti-features has been completed.
-
-This change is **breaking** in the sense that flakes which are written with the newly allowed language features will not evaluate with an older Lix version which still uses the old, more restrictive checks.
-Crucially, this also affects **all transitive dependants** of such Flakes.
@@ -1,28 +0,0 @@
---
-synopsis: "Fix unsigned overflow leading to out-of-band write in the NAR parser"
-cls: [5554]
-category: "Fixes"
-credits: [horrors, raito, edef, sandydoo]
-issues: []
---
-
-The NAR parser contained an unsigned integer overflow that could be used by an
-attacker to write arbitrary data to an unknown memory location and possibly
-achieve code execution. A successful attack on the system-wide Lix daemon
-could lead to privilege escalation to root. Any process that involves NAR
-serialization could trigger this issue, including (but not limited to)
-
-  - local user interaction, whether the users are trusted or untrusted
-  - malicious substituters sending malformed NARs
-  - remote builders sending malformed build results
-  - remote daemons sending malformed inputs when requesting remote builds
-
-Successful attacks using this bug require ASLR weakening of some sort, whether
-by architecture constraints (e.g. on 32 bit systems, where little randomization
-is possible) or system configuration (e.g. low ASLR entropy when loading
-libraries), and millions of attempts. Local attacks can be mounted in less than
-an hour. Remote builds typically require a fresh SSH connection for each build
-and are thus less susceptible. Only one attempt can be made by substituters for
-every build using substituters, they are thus not a likely vector for attacks.
-
-At the time of writing, MITRE has not assigned this a CVE yet.
@@ -1,23 +0,0 @@
---
-synopsis: "Always print frames from `addErrorContext` in error traces"
-cls: [5847]
-category: "Improvements"
-credits: [blokyk]
-issues: []
---
-
-The [`builtins.addErrorContext`](@docroot@/language/builtins.md#builtins-addErrorContext)
-function allows an author to add artificial stack frames with custom messages to
-help end-users understand the context of an error and the path the code took to
-get there, without having to read and understand the original source code. A
-particularly notable user of this is the Nixpkgs module system, which adds
-custom frames detailing what option it's evaluating or which definition it's
-looking at.
-
-However, previously, these frames would end up treated just as any other,
-meaning they would most often not be visible without `--show-trace`; yet, using
-`--show-trace`, they would be drowned out in the noise of the hundreds of other
-frames, rendering them just as unusable.
-
-With this change, these frames are now unconditionally shown, even without
-`--show-trace`, which makes basic error traces much more informative.
@@ -20,6 +20,7 @@
  - [Basic Package Management](package-management/basic-package-mgmt.md)
  - [Profiles](package-management/profiles.md)
  - [Garbage Collection](package-management/garbage-collection.md)
+    - [Garbage Collector Roots](package-management/garbage-collector-roots.md)
  - [Sharing Packages Between Machines](package-management/sharing-packages.md)
    - [Serving a Nix store via HTTP](package-management/binary-cache-substituter.md)
    - [Copying Closures via SSH](package-management/copy-closure.md)
@@ -39,9 +40,6 @@
  - [Tuning Cores and Jobs](advanced-topics/cores-vs-jobs.md)
  - [Verifying Build Reproducibility](advanced-topics/diff-hook.md)
  - [Using the `post-build-hook`](advanced-topics/post-build-hook.md)
-  - [Pasta](advanced-topics/pasta.md)
- [Known Issues](known-issues/known-issues.md)
-  - [Limitations around non-isolated builds](known-issues/non-isolated-build-limits.md)
 - [Command Reference](command-ref/command-ref.md)
  - [Common Options](command-ref/opt-common.md)
  - [Common Environment Variables](command-ref/env-common.md)
@@ -200,10 +198,6 @@
 - [Release Notes](release-notes/release-notes.md)
  - [Upcoming release](release-notes/rl-next.md)
    <!-- RELENG-AUTO-INSERTION-MARKER (see releng/release_notes.py) -->
-  - [Lix 2.95 (2026-03-13)](release-notes/rl-2.95.md)
-  - [Lix 2.94 (2025-11-17)](release-notes/rl-2.94.md)
-  - [Lix 2.93 (2025-05-09)](release-notes/rl-2.93.md)
-  - [Lix 2.92 (2025-01-18)](release-notes/rl-2.92.md)
  - [Lix 2.91 (2024-08-12)](release-notes/rl-2.91.md)
  - [Lix 2.90 (2024-07-10)](release-notes/rl-2.90.md)
  - [Nix 2.18 (2023-09-20)](release-notes/rl-2.18.md)
@@ -41,17 +41,104 @@ contains Nix.
 > If you are building via the Lix daemon (default on Linux and macOS), it is the Lix daemon user account (that is, `root`) that should have SSH access to a user (not necessarily `root`) on the remote machine.
 >
 > Furthermore, `root` needs to have the public host keys for the remote system in its `.ssh/known_hosts`.
-> To add them to `known_hosts` for root, do `ssh-keyscan HOST | sudo tee -a ~root/.ssh/known_hosts`.
+> To add them to `known_hosts` for root, do `ssh-keyscan USER@HOST | sudo tee -a ~root/.ssh/known_hosts`.
 >
 > If you can’t or don’t want to configure `root` to be able to access the remote machine, you can use a private Nix store instead by passing e.g. `--store ~/my-nix` when running a Nix command from the local machine.

-
-## Configuration
-
 The list of remote machines can be specified on the command line or in
-the Lix configuration file. The former is convenient for testing.
-Additionally, there are two supported formats to configure remote builders:
-The legacy, "space"-separated format and starting with Lix 2.95.0, a TOML.
+the Lix configuration file. The former is convenient for testing. For
+example, the following command allows you to build a derivation for
+`x86_64-darwin` on a Linux machine:
+
+```console
+$ uname
+Linux
+
+$ nix build --impure \
+  --expr '(with import <nixpkgs> { system = "x86_64-darwin"; }; runCommand "foo" {} "uname > $out")' \
+  --builders 'ssh://mac x86_64-darwin'
+[1/0/1 built, 0.0 MiB DL] building foo on ssh://mac
+
+$ cat ./result
+Darwin
+```
+
+It is possible to specify multiple builders separated by a semicolon or
+a newline, e.g.
+
+```console
+  --builders 'ssh://mac x86_64-darwin ; ssh://beastie x86_64-freebsd'
+```
+
+Each machine specification consists of the following elements, separated
+by spaces. Only the first element is required. To leave a field at its
+default, set it to `-`.
+
+1.  The URI of the remote store in the format
+    `ssh://[username@]hostname`, e.g. `ssh://nix@mac` or `ssh://mac`.
+    For backward compatibility, `ssh://` may be omitted. The hostname
+    may be an alias defined in your `~/.ssh/config`.
+
+2.  A comma-separated list of Nix platform type identifiers, such as
+    `x86_64-darwin`. It is possible for a machine to support multiple
+    platform types, e.g., `i686-linux,x86_64-linux`. If omitted, this
+    defaults to the local platform type.
+
+3.  The SSH identity file to be used to log in to the remote machine. If
+    omitted, SSH will use its regular identities.
+
+4.  The maximum number of builds that Lix will execute in parallel on
+    the machine. Typically this should be equal to the number of CPU
+    cores. For instance, the machine `itchy` in the example will execute
+    up to 8 builds in parallel.
+
+5.  The “speed factor”, indicating the relative speed of the machine. If
+    there are multiple machines of the right type, Lix will prefer the
+    fastest, taking load into account.
+
+6.  A comma-separated list of *supported features*. If a derivation has
+    the `requiredSystemFeatures` attribute, then Lix will only perform
+    the derivation on a machine that has the specified features. For
+    instance, the attribute
+
+    ```nix
+    requiredSystemFeatures = [ "kvm" ];
+    ```
+
+    will cause the build to be performed on a machine that has the `kvm`
+    feature.
+
+7.  A comma-separated list of *mandatory features*. A machine will only
+    be used to build a derivation if all of the machine’s mandatory
+    features appear in the derivation’s `requiredSystemFeatures`
+    attribute.
+
+8.  The (base64-encoded) public host key of the remote machine. If omitted, SSH
+    will use its regular known-hosts file. Specifically, the field is calculated
+    via `base64 -w0 /etc/ssh/ssh_host_ed25519_key.pub`.
+
+For example, the machine specification
+
+    nix@scratchy.labs.cs.uu.nl  i686-linux      /home/nix/.ssh/id_scratchy_auto        8 1 kvm
+    nix@itchy.labs.cs.uu.nl     i686-linux      /home/nix/.ssh/id_scratchy_auto        8 2
+    nix@poochie.labs.cs.uu.nl   i686-linux      /home/nix/.ssh/id_scratchy_auto        1 2 kvm benchmark
+
+specifies several machines that can perform `i686-linux` builds.
+However, `poochie` will only do builds that have the attribute
+
+```nix
+requiredSystemFeatures = [ "benchmark" ];
+```
+
+or
+
+```nix
+requiredSystemFeatures = [ "benchmark" "kvm" ];
+```
+
+`itchy` cannot do builds that require `kvm`, but `scratchy` does support
+such builds. For regular builds, `itchy` will be preferred over
+`scratchy` because it has a higher speed factor.

 Remote builders can also be configured in `nix.conf`, e.g.

@@ -70,180 +157,3 @@ option `builders-use-substitutes` in your local `nix.conf`.

 To build only on remote builders and disable building on the local
 machine, you can use the option `--max-jobs 0`.
-
---
-
-Each machine specification consists of the following attributes.
-How those are combined within the configuration file differs for the formats, and will be explained further down.
-
-1.  `uri` (**required**)
-    The URI of the remote store in the format
-    `ssh[-ng]://[username@]hostname[?port=<port>]`, e.g. `ssh://nix@mac` or `ssh://mac`.
-    If the ssh server is not listening on port 22 (e.g. port 1337 in this case)
-    the URI would be `ssh[-ng]://nix@mac?port=1337`. The hostname
-    may be an alias defined in your `~/.ssh/config`.
-
-2.  `system-types` (**optional**)
-    A list of Nix platform type identifiers, such as
-    `x86_64-darwin`. It is possible for a machine to support multiple
-    platform types, e.g., `i686-linux` and `x86_64-linux`.
-
-    Defaults to the local platform type
-
-3.  `ssh-key` (**optional**)
-    The SSH identity file to be used to log in to the remote machine.
-
-    Defaults to SSHs regular identities.
-
-4.  `jobs` (**optional**)
-    The maximum number of builds that Lix will execute in parallel on
-    the machine. Typically, this should be equal to the number of CPU
-    cores divided by the cores within the target machines configuration, i.e. `jobs * cores ~= cpu cores`
-
-    Defaults to 1; must be a positive integer.
-
-5.  `speed-factor`
-    The “speed factor”, indicating the relative speed of the machine. If
-    there are multiple machines of the right type, Lix will prefer the
-    fastest, taking load into account.
-
-    Defaults to 1; must be a positive float.
-
-6.  `supported-features` (**optional**)
-    A list of *supported features*. If a derivation has
-    the `requiredSystemFeatures` attribute, then Lix will only schedule
-    the derivation on a machine that has the specified features. For
-    example, the attribute
-
-    ```nix
-    requiredSystemFeatures = [ "kvm" ];
-    ```
-
-    will cause the build to be performed on a machine that has the `kvm`
-    feature.
-
-    Defaults to an empty list.
-
-7.  `mandatory-features` (**optional**)
-    A list of *mandatory features*. A machine will only
-    be used to build a derivation if all the machine’s mandatory
-    features appear in the derivation’s `requiredSystemFeatures`
-    attribute.
-
-    Defaults to an empty list.
-
-8.  `ssh-public-host-key` (**optional**)
-    The public host key of the remote machine.
-
-    Defaults to basic ssh behavior (checking contents of the known-hosts file)
-
-
-### Using a TOML configuration
-
-Each machine is configured as an attribute within the map called `machines`.
-The attributes name is the machines name.
-Attributes can be in any order.
-
-For example:
-
-```toml
-version = 1
-
-[machines.andesite]
-uri = "ssh://lix@andesite.lix.systems" # toml also allows for comments
-system-types = ["i686-linux"]
-jobs = 8
-speed-factor = 1.0
-supported-features = ["kvm"]
-ssh-key = "/home/deepslate/.ssh/id_ed25519"
-
-[machines.diorite]
-uri = "ssh://lix@diorite.lix.systems"
-system-types = ["i686-linux"]
-jobs = 8
-speed-factor = 2.0
-ssh-key = "/home/deepslate/.ssh/id_ed25519"
-
-[machines.granite]
-uri = "ssh://lix@granite.lix.systems"
-system-types = ["i686-linux"]
-jobs = 1
-speed-factor = 2.0
-supported-features = ["kvm", "benchmark"]
-ssh-key = "/home/deepslate/.ssh/id_ed25519"
-
-[machines.legacy]
-uri = "ssh://nix@nix-15-11.nixos.org"
-enable = false
-
-```
-
-> **Note**
->
-> If the version tag is omitted (e.g. in the CLI), it defaults to the latest version.
-> It is strongly recommended to always provide a version tag for configuration within files to avoid breakage.
-
-For testing purposes, one can also define a builder ad hoc on the CLI as follows:
-`--builders 'machines.andesite = {uri = "ssh://lix@andesite.lix.systems", jobs = 8}'`
-
-
-#### Special handling of fields
- - `enable` (**optional**)
-    If set to false, the declared machine will not be loaded.
-    This allows one to statically disable machines.
-
-    Defaults to true
-
-### Using the legacy format
-> **Warning**
->
-> This format is frozen and new features / configuration options will not be backported to this format.
-
-It is possible to specify multiple builders separated by a semicolon or
-a newline, e.g.
-
-```console
-  --builders 'ssh://mac x86_64-darwin ; ssh://beastie x86_64-freebsd'
-```
-
-Every machine specification consists of the elements listed in the section above, seperated by any amount of spaces or tabs.
-The Attributes need to be provided **in order** and without names.
-To leave a field at its default, set it to `-`.
-Lists are colon seperated, without additional spaces.
-
-```
-lix@andesite.lix.systems    i686-linux      /home/deepslate/.ssh/id_ed25519        8 1 kvm
-lix@diorite.lix.systems     i686-linux      /home/deepslate/.ssh/id_ed25519        8 2
-lix@granite.lix.systems     i686-linux      /home/deepslate/.ssh/id_ed25519        1 2 kvm benchmark
-```
-
-#### Special handling of fields
- `uri`: Due to backward compatibility, the `ssh://` may be omitted for the store-uri.
- `ssh-public-host-key`: The key must be provided encoded in base64. Specifically calculated via `base64 -w0 /etc/ssh/ssh_host_ed25519_key.pub`
-
-
-### Format detection
-
-At first, the given configuration is being parsed syntactically as a toml.
-If parsing fails and the given configuration contains a `"` the error is presented to the user, as those characters are necessary for TOML, but disallowed for the legacy format.
-Otherwise, parsing is retried using the legacy format.
-If non-syntactic errors are detected within the toml, the exception will always be shown to the user directly.
-
-
-## Builder selection
-The configuration(s) above specify several machines that can perform `i686-linux` builds.
-However, `granite` will only do builds that have the attribute
-
-```nix
-requiredSystemFeatures = [ "benchmark" ];
-```
-
-or
-
-```nix
-requiredSystemFeatures = [ "benchmark" "kvm" ];
-```
-
-`diorite` cannot do builds that require `kvm`, but `andesite` does support
-such builds. For regular builds, `diorite` will be preferred over
-`andesite` because it has a higher speed factor.
@@ -1,19 +0,0 @@
-# [Pasta](https://passt.top/passt/about/): a network sandbox for fixed-output derivations
-
-## Introduction
-
-This section only applies to **Linux systems** as Pasta is a Linux-only measure.
-
-Since [CVE-2025-46416](https://lix.systems/blog/2025-06-24-lix-cves/), the Lix project decided to adopt [Pasta](https://passt.top/passt/about/) for all fixed-output derivations, protecting against various attack vectors such as UNIX abstract domain sockets or more manipulation at the network layer from a malicious fixed-output derivation code.
-
-Pasta acts as a translation layer between a layer-2 network interface and layer-4 sockets (TCP, UDP, ICMP/ICMPv6 echo) on the host. It requires no special privileges and can serve as a alternative to [SLiRP](https://en.wikipedia.org/wiki/Slirp) which was used [by Guix to mitigate the same problem](https://codeberg.org/guix/guix/commit/fb42611b8f27960304db5a1c0d33b8371dcde2a8).
-
-## How to disable Pasta?
-
-It's sufficient to pass `pasta-path = ""` in your `/etc/nix/nix.conf` or on the command line `--pasta-path ""` of a Lix invocation.
-
-## Known issues surrounding Pasta
-
- Only the first DNS server in `/etc/resolv.conf` is considered: failover is not possible.
- [Reduced feature set compared to the Linux kernel](https://passt.top/passt/about/#features)
- [Performance overhead in multi-gigabits contexts and IMIX MTUs](https://passt.top/passt/about/#performance_1)
@@ -22,9 +22,9 @@ The following [concept map] shows its main components (rectangles), the objects
           |                   |
 +----------|-------------------|--------------------------------+
 | Nix impl.|                   V                                |
-| (Lix)    |       +------------------------+                   |
-|          |       | command line interface |------.            |
-|          |       +------------------------+      |            |
+| (Lix)    |      +-------------------------+                   |
+|          |      | commmand line interface |------.            |
+|          |      +-------------------------+      |            |
 |          |                   |                   |            |
 |    evaluated by            calls              manages         |
 |          |                   |                   |            |
@@ -34,15 +34,9 @@ keep-outputs = true       # Nice for developers
 keep-derivations = true   # Idem
 ```

-Other files can be included with a line like `include <path>`.
+Other files can be included with a line like `include <path>`, where `<path>` is interpreted relative to the current configuration file.
 A missing file is an error unless `!include` is used instead.

-Paths in `include`s and option values are interpreted relative to the current configuration file.
-In user configuration files, paths starting with `~/` are tilde expanded (by replacing the tilde by the value of `$HOME`).
-
-Only user configuration files (like `$XDG_CONFIG_HOME/nix/nix.conf` or the files listed in `$NIX_USER_CONF_FILES`) can use tilde paths relative to your home directory.
-Configuration listed in the `$NIX_CONFIG` environment variable may not use relative paths.
-
 A configuration setting usually overrides any previous value.
 However, for settings that take a list of items, you can prefix the name of the setting by `extra-` to *append* to the previous value.

@@ -1,12 +0,0 @@
-<!--
-  File-ish argument syntax summary.
-  This file gets included into pages like nix-build.md and nix-instantiate.md, and each individual page that includes
-  this also links to nix-build.md for the full explanation.
-->
- A normal filesystem path, like `/home/meow/nixfiles/default.nix`
-  - Or a directory, like `/home/meow/nixfiles`, equivalent to above
- A single lookup path, like `<nixpkgs>` or `<nixos>`
- A URL to a tarball, like `https://github.com/NixOS/nixpkgs/archive/refs/heads/release-23.11.tar.gz`
- A [flakeref](@docroot@/command-ref/new-cli/nix3-flake.md#flake-references), introduced by the prefix `flake:`, like `flake:git+https://git.lix.systems/lix-project/lix`
- A *nixpkgs* channel tarball name, introduced by the prefix `channel:`, like `channel:nixos-unstable`.
-  - This uses a hard-coded URL pattern and is *not* related to the subscribed channels managed by the [nix-channel](@docroot@/command-ref/nix-channel.md) command.
@@ -1,3 +1,37 @@
+experimental_features_shortlist_md = custom_target(
+  command : nix_eval_for_docs + [
+    '--expr',
+    'import @INPUT0@ "experimental" "xp" (builtins.fromJSON (builtins.readFile @INPUT1@))',
+  ],
+  input : [
+    '../../generate-features-shortlist.nix',
+    nix_exp_features_json,
+  ],
+  capture : true,
+  output : 'experimental-features-shortlist.md',
+  env : nix_env_for_docs,
+)
+
+dp_features_json = custom_target(
+  command : [nix, '__dump-dp-features'],
+  capture : true,
+  output : 'dp-features.json',
+)
+
+deprecated_features_shortlist_md = custom_target(
+  command : nix_eval_for_docs + [
+    '--expr',
+    'import @INPUT0@ "deprecated" "dp" (builtins.fromJSON (builtins.readFile @INPUT1@))',
+  ],
+  input : [
+    '../../generate-features-shortlist.nix',
+    dp_features_json,
+  ],
+  capture : true,
+  output : 'deprecated-features-shortlist.md',
+  env : nix_env_for_docs,
+)
+
 # Intermediate step for manpage generation.
 # This splorks the output of generate-manpage.nix as JSON,
 # which gets written as a directory tree below.
@@ -31,23 +65,17 @@ nix3_cli_files = custom_target(

 conf_file_md = custom_target(
  command : [
-    python.full_path(),
-    '@SOURCE_ROOT@/lix/code-generation/build_settings.py',
-    '--kernel', host_machine.system(),
-    '--docs', '@OUTPUT@',
-    '--experimental-features', '@SOURCE_ROOT@/lix/libutil/experimental-features',
-    '@INPUT@',
+    nix_eval_for_docs,
+    '--expr',
+    '(import @INPUT0@).showSettings { inlineHTML = true; } (builtins.fromJSON (builtins.readFile @INPUT1@))',
  ],
+  capture : true,
  input : [
-    libexpr_setting_definitions,
-    libfetchers_setting_definitions,
-    file_transfer_setting_definitions,
-    libstore_setting_definitions,
-    archive_setting_definitions,
-    feature_setting_definitions,
-    logging_setting_definitions,
-    daemon_setting_definitions,
-    develop_settings_definitions,
+    '../../utils.nix',
+    conf_file_json,
+    experimental_features_shortlist_md,
+    deprecated_features_shortlist_md,
  ],
  output : 'conf-file.md',
+  env : nix_env_for_docs,
 )
@@ -4,7 +4,7 @@

 # Synopsis

-`nix-build` [*fileish…*]
+`nix-build` [*paths…*]
  [`--arg` *name* *value*]
  [`--argstr` *name* *value*]
  [{`--attr` | `-A`} *attrPath*]
@@ -20,55 +20,19 @@ For documentation on the latter, run `nix build --help` or see `man nix3-build`.
 # Description

 The `nix-build` command builds the derivations described by the Nix
-expressions in each *fileish*. If the build succeeds, it places a symlink to
+expressions in *paths*. If the build succeeds, it places a symlink to
 the result in the current directory. The symlink is called `result`. If
 there are multiple Nix expressions, or the Nix expressions evaluate to
 multiple derivations, multiple sequentially numbered symlinks are
 created (`result`, `result-2`, and so on).

-If no *fileish* is specified, then `nix-build` will use `default.nix` in
+If no *paths* are specified, then `nix-build` will use `default.nix` in
 the current directory, if it exists.

-## Fileish Syntax
-
-A given *fileish* may take one of a few different forms, the first being a simple filesystem path, e.g. `nix-build /tmp/some-file.nix`.
-Like the [import builtin](../language/builtins.md#builtins-import) specifying a directory is equivalent to specifying `default.nix` within that directory.
-It may also be a [search path](./env-common.md#env-NIX_PATH) (also known as a lookup path) like `<nixpkgs>`, which is convenient to use with `--attr`/`-A`:
-
-```console
-$ nix-build '<nixpkgs>' -A firefox
-```
-
-(Note the quotation marks around `<nixpkgs>`, which will be necessary in most Unix shells.)
-
-If a *fileish* starts with `http://` or `https://`, it is interpreted as the URL of a tarball which will be fetched and unpacked.
-Lix will then `import` the unpacked directory, so these tarballs must include at least a single top-level directory with a file called `default.nix`
-For example, you could build from a specific version of Nixpkgs with something like:
-
-```console
-$ nix-build "https://github.com/NixOS/nixpkgs/archive/refs/heads/release-23.11.tar.gz" -A firefox
-```
-
-If a path starts with `flake:`, the rest of the argument is interpreted as a [flakeref](./new-cli/nix3-flake.md#flake-references) (see `nix flake --help` or `man nix3-flake`), which requires the "flakes" experimental feature to be enabled.
-Lix will fetch the flake, and then `import` its unpacked directory, so the flake must include a file called `default.nix`.
-For example, the flake analogues to the above `nix-build` commands are:
-
-```console
-$ nix-build flake:nixpkgs -A firefox
-$ nix-build flake:github:NixOS/nixpkgs/release-23.11 -A firefox
-```
-
-Finally, for legacy reasons, if a path starts with `channel:`, the rest of the argument is interpreted as the name of a *nixpkgs* channel tarball to fetch from `https://channels.nixos.org/$CHANNEL_NAME/nixexprs.tar.xz`.
-This is a **hard coded URL** pattern and is *not* related to the subscribed channels managed by the [nix-channel](./nix-channel.md) command.
-
-> **Note**: any of the special syntaxes may always be disambiguated by prefixing the path.
-> For example: a file in the current directory literally called `<nixpkgs>` can be addressed as `./<nixpkgs>`, to escape the special interpretation.
-
-In summary, a path argument may be one of:
-
-{{#include ./fileish-summary.md}}
-
-## Notes
+If an element of *paths* starts with `http://` or `https://`, it is
+interpreted as the URL of a tarball that will be downloaded and unpacked
+to a temporary location. The tarball must include a single top-level
+directory containing at least a file named `default.nix`.

 `nix-build` is essentially a wrapper around
 [`nix-instantiate`](nix-instantiate.md) (to translate a high-level Nix
@@ -11,10 +11,10 @@
 Channels are a mechanism for referencing remote Nix expressions and conveniently retrieving their latest version.

 The moving parts of channels are:
- The official channels listed at <https://channels.nixos.org>
+- The official channels listed at <https://nixos.org/channels>
 - The user-specific list of [subscribed channels](#subscribed-channels)
 - The [downloaded channel contents](#channels)
- The [Nix expression search path](@docroot@/command-ref/conf-file.md#conf-nix-path), set with the [`-I` option](#opt-I) or the [`NIX_PATH` environment variable](#env-NIX_PATH)
+- The [Nix expression search path](@docroot@/command-ref/conf-file.md#conf-nix-path), set with the [`-I` option](#opt-i) or the [`NIX_PATH` environment variable](#env-NIX_PATH)

 > **Note**
 >
@@ -77,9 +77,9 @@ This command has the following operations:
 Subscribe to the Nixpkgs channel and run `hello` from the GNU Hello package:

 ```console
-$ nix-channel --add https://channels.nixos.org/nixpkgs-unstable
+$ nix-channel --add https://nixos.org/channels/nixpkgs-unstable
 $ nix-channel --list
-nixpkgs https://channels.nixos.org/nixpkgs
+nixpkgs https://nixos.org/channels/nixpkgs
 $ nix-channel --update
 $ nix-shell -p hello --run hello
 hello
@@ -36,7 +36,7 @@ Instead, it looks in a few locations, and acts on all profiles it finds there:
   >
   > Not stable; subject to change
   >
-   > Do not rely on this functionality; it just exists for migration purposes and may change in the future.
+   > Do not rely on this functionality; it just exists for migration purposes and is may change in the future.
   > These deprecated paths remain a private implementation detail of Lix.

   <!-- FIXME(Qyriad): this is inconsistent with https://git.lix.systems/lix-project/lix/issues/215, needs updating when that happens -->
@@ -8,7 +8,7 @@
  [`--option` *name* *value*]
  [`--arg` *name* *value*]
  [`--argstr` *name* *value*]
-  [{`--file` | `-f`} *fileish*]
+  [{`--file` | `-f`} *path*]
  [{`--profile` | `-p`} *path*]
  [`--system-filter` *system*]
  [`--dry-run`]
@@ -26,7 +26,7 @@ This operation deletes the specified generations of the current profile.
  >
  > Older *and newer* generations will be deleted by this operation.
  >
-  > One might expect this to just delete older generations than the current one, but that is only true if the current generation is also the latest.
+  > One might expect this to just delete older generations than the curent one, but that is only true if the current generation is also the latest.
  > Because one can roll back to a previous generation, it is possible to have generations newer than the current one.
  > They will also be deleted.

@@ -11,7 +11,6 @@
  [`--from-profile` *path*]
  [`--preserve-installed` | `-P`]
  [`--remove-all` | `-r`]
-  [`--priority` *priority*]

 # Description

@@ -60,11 +59,6 @@ a number of possible ways:
    unambiguous way, which is necessary if there are multiple
    derivations with the same name.

-  - If `--priority` *priority* is given, the priority of the derivations being
-    installed is set to *priority*. This can be used to override the priority of
-    the derivations being installed. This is useful if *args* are store paths,
-    which don't have any priority information.
-
  - If *args* are [store derivations](@docroot@/glossary.md#gloss-store-derivation), then these are
    [realised](@docroot@/command-ref/nix-store/realise.md), and the resulting output paths
    are installed.
@@ -148,8 +142,8 @@ To copy the store path with symbolic name `gcc` from another profile:
 $ nix-env --install --from-profile /nix/var/nix/profiles/foo gcc
 ```

-To install a specific [store derivation](@docroot@/glossary.md#gloss-store-derivation)
-(typically created by `nix-instantiate`):
+To install a specific [store derivation] (typically created by
+`nix-instantiate`):

 ```console
 $ nix-env --install /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv
@@ -2,16 +2,16 @@

 The following options are allowed for all `nix-env` operations, but may not always have an effect.

-  - `--file` / `-f` *fileish*\
+  - `--file` / `-f` *path*\
    Specifies the Nix expression (designated below as the *active Nix
    expression*) used by the `--install`, `--upgrade`, and `--query
    --available` operations to obtain derivations. The default is
    `~/.nix-defexpr`.

-    *fileish* is interpreted the same as with [nix-build](../nix-build.md#fileish-syntax).
-    See that section for complete details (`nix-build --help`), but in summary, a path argument may be one of:
-
-    {{#include ../fileish-summary.md}}
+    If the argument starts with `http://` or `https://`, it is
+    interpreted as the URL of a tarball that will be downloaded and
+    unpacked to a temporary location. The tarball must include a single
+    top-level directory containing at least a file named `default.nix`.

  - `--profile` / `-p` *path*\
    Specifies the profile to be used by those operations that operate on
@@ -22,7 +22,7 @@ left untouched; this is not an error. It is also not an error if an
 element of *args* matches no installed derivations.

 For a description of how *args* is mapped to a set of store paths, see
-[`--install`](install.md). If *args* describes multiple
+[`--install`](#operation---install). If *args* describes multiple
 store paths with the same symbolic name, only the one with the highest
 version is installed.

@@ -5,13 +5,13 @@
 # Synopsis

 `nix-instantiate`
-  [`--parse` | `--eval` [`--strict`] [`--raw`] [`--json`] [`--xml`] ]
+  [`--parse` | `--eval` [`--strict`] [`--json`] [`--xml`] ]
  [`--read-write-mode`]
  [`--arg` *name* *value*]
  [{`--attr`| `-A`} *attrPath*]
  [`--add-root` *path*]
  [`--expr` | `-E`]
-  *fileish…*
+  *files…*

 `nix-instantiate` `--find-file` *files…*

@@ -25,11 +25,8 @@ of the resulting store derivations are printed on standard output.

 [store derivation]: ../glossary.md#gloss-store-derivation

-If *fileish* is the character `-`, then a Nix expression will be read from standard input.
-Otherwise, each *fileish* is interpreted the same as with [nix-build](./nix-build.md#fileish-syntax).
-See that section for complete details (`nix-build --help`), but in summary, a path argument may be one of:
-
-{{#include ./fileish-summary.md}}
+If *files* is the character `-`, then a Nix expression will be read from
+standard input.

 # Options

@@ -38,14 +35,7 @@ See that section for complete details (`nix-build --help`), but in summary, a pa

  - `--parse`\
    Just parse the input files, and print their abstract syntax trees on
-    standard output. The output format of the AST depends on the current
-    internal representation and may change in the future.
-
-    Tooling can use the stderr and exit code of `--parse` to check any
-    Nix code for correctness, but should not rely on stdout without careful
-    versioning. Note that `--parse` also checks for unbound variables.
-    In cases where this is undesired, `with {};` can be prepended
-    to the program to transform all such parse errors into eval errors.
+    standard output as a Nix expression.

  - `--eval`\
    Just parse and evaluate the input files, and print the resulting
@@ -107,27 +97,15 @@ See that section for complete details (`nix-build --help`), but in summary, a pa
    > This option can cause non-termination, because lazy data
    > structures can be infinitely large.

-  - `--raw`\
-    When used with `--eval`, the result must be coercible to a string, i.e.,
-    something that can be converted using `${...}`.
-
-    Integers will always generate an error when output via `--raw`, regardless of
-    [`coerce-integers`](../contributing/experimental-features.md#xp-feature-coerce-integers) being enabled, to avoid ambiguity.
-
-    The output is printed exactly as-is, with no quotes, escaping, or trailing
-    newline.
-
  - `--json`\
    When used with `--eval`, print the resulting value as an JSON
-    representation of the resulting value rather than as a Nix expression.
-
-    The conversion behaviour, if `--strict` is passed, is the same as
-    [`builtins.toJSON`](../language/builtins.md#builtins-toJSON).
+    representation of the abstract syntax tree rather than as a Nix expression.

  - `--xml`\
    When used with `--eval`, print the resulting value as an XML
-    representation of the resulting value rather than as a Nix expression.
-    The schema is the same as that used by [`builtins.toXML`](../language/builtins.md#builtins-toXML).
+    representation of the abstract syntax tree rather than as a Nix expression.
+    The schema is the same as that used by the [`toXML`
+    built-in](../language/builtins.md).

  - `--read-write-mode`\
    When used with `--eval`, perform evaluation in read/write mode so
@@ -33,9 +33,10 @@ the environment of a derivation for development.
 If *path* is not given, `nix-shell` defaults to `shell.nix` if it
 exists, and `default.nix` otherwise.

-If *path* is given it is interpreted like a [*fileish* argument to nix-build](./nix-build.md#fileish-syntax):
-
-{{#include ./fileish-summary.md}}
+If *path* starts with `http://` or `https://`, it is interpreted as the
+URL of a tarball that will be downloaded and unpacked to a temporary
+location. The tarball must include a single top-level directory
+containing at least a file named `default.nix`.

 If the derivation defines the variable `shellHook`, it will be run
 after `$stdenv/setup` has been sourced. Since this hook is not executed
@@ -4,7 +4,7 @@

 # Synopsis

-`nix-store` `--delete` [`--ignore-liveness`] [`--skip-live`] [`--delete-closure`] *paths…*
+`nix-store` `--delete` [`--ignore-liveness`] *paths…*

 # Description

@@ -18,13 +18,6 @@ With the option `--ignore-liveness`, reachability from the roots is
 ignored. However, the path still won’t be deleted if there are other
 paths in the store that refer to it (i.e., depend on it).

-This operation will raise an error if any of the paths are still live
-and `--ignore-liveness` is not passed. Passing `--skip-live` will
-prevent this from being considered an error.
-
-The option `--delete-closure` will also attempt to delete any paths
-that are in the given path's dependency closure.
-
 {{#include ./opt-common.md}}

 {{#include ../opt-common.md}}
@@ -93,12 +93,9 @@ symlink.
    [deriver]: ../../glossary.md#gloss-deriver

  - `--valid-derivers`\
-    Prints the set of all [derivers](../../glossary.md#gloss-deriver) that can be
-    used to build the store paths *paths*.
-    This differs from `--deriver`, which prints the deriver that actually
-    produced *paths*.
-    No deriver may be returned if is not present in the store,
-    eg, if *paths* were substituted from a binary cache.
+    Prints a set of derivation files (`.drv`) which are supposed produce
+    said paths when realized. Might print nothing, for example for source paths
+    or paths subsituted from a binary cache.

  - `--graph`\
    Prints the references graph of the store paths *paths* in the format
@@ -15,6 +15,7 @@ Each of *paths* is processed as follows:
  1. If it is not [valid], substitute the store derivation file itself.
  2. Realise its [output paths]:
    - Try to fetch from [substituters] the [store objects] associated with the output paths in the store derivation's [closure].
+      - With [content-addressed derivations] (experimental): Determine the output paths to realise by querying content-addressed realisation entries in the [Nix database].
    - For any store paths that cannot be substituted, produce the required store objects. This involves first realising all outputs of the derivation's dependencies and then running the derivation's [`builder`](@docroot@/language/derivations.md#attr-builder) executable. <!-- TODO: Link to build process page #8888 -->
 - Otherwise, and if the path is not already valid: Try to fetch the associated [store objects] in the path's [closure] from [substituters].

@@ -27,6 +28,7 @@ If no substitutes are available and no store derivation is given, realisation fa
 [store objects]: @docroot@/glossary.md#gloss-store-object
 [closure]: @docroot@/glossary.md#gloss-closure
 [substituters]: @docroot@/command-ref/conf-file.md#conf-substituters
+[content-addressed derivations]: @docroot@/contributing/experimental-features.md#xp-feature-ca-derivations
 [Nix database]: @docroot@/glossary.md#gloss-nix-database

 The resulting paths are printed on standard output.
@@ -85,7 +85,7 @@ Most commands in Lix accept the following command-line options:

  - `multiline-with-logs`

-    Display the raw logs, with a progress bar and activities each in a new line at the bottom.
+    Displayes the raw logs, with a progress bar and activities each in a new line at the bottom.


 - <span id="opt-no-build-output">[`--no-build-output`](#opt-no-build-output)</span> / `-Q`
@@ -177,12 +177,6 @@ Most commands in Lix accept the following command-line options:
  You can override this using `--arg`, e.g., `nix-env --install --attr pkgname --arg system \"i686-freebsd\"`.
  (Note that since the argument is a Nix string literal, you have to escape the quotes.)

-  Additionally, dots are interpreted as attribute-path separators.
-  I.e. `nix-instantiate '<nixpkgs>' -A hello-unfree --arg config.allowUnfree true` will result in an argument `config` with value `{ allowUnfree = true; }` being passed to `<nixpkgs>`.
-
-  Please note that merging of different arguments is rejected.
-  I.e. `--arg config '{ cudaSupport = true; }' --arg config.allowUnfree true` will not work whereas `--arg config.cudaSupport true --arg config.allowUnfree true` is accepted.
-
 - <span id="opt-argstr">[`--argstr`](#opt-argstr)</span> *name* *value*

  This option is like `--arg`, only the value is not a Nix expression but a string.
@@ -661,8 +661,8 @@ Verbosity levels are:

 The default level that the command starts is `ERROR`. The simplest way to
 increase the verbosity by stacking `-v` option (eg: `-vvv == level 3 == INFO`).
-Use `--quiet` to decrease verbosity by one level.
-There is one shortcut, `--debug` to run in `DEBUG` verbosity level.
+There are also two shortcuts, `--debug` to run in `DEBUG` verbosity level and
+`--quiet` to run in `ERROR` verbosity level.

 ----------

@@ -19,7 +19,7 @@ This description is not normative, but a feature removal may roughly happen like
 1. Add a warning when the feature is being used.
 2. Disable the feature by default, putting it behind a deprecated feature flag.
  - If disabling the feature started out as an opt-in experimental feature, turn that experimental flag into a no-op or remove it entirely.
-    For example, `--extra-experimental-features no-url-literals` becomes `--extra-deprecated-features url-literals`.
+    For example, `--extra-experimental-features=no-url-literals` becomes `--extra-deprecated-features=url-literals`.
 3. Decide on a time frame for how long that feature will still be supported for backwards compatibility, and clearly communicate that in the error messages.
  - Sometimes, automatic migration to alternatives is possible, and such should be provided if possible
  - At least one NixOS release cycle should be the minimum
@@ -34,4 +34,4 @@ However, we do not live in such an ideal world, and currently this goal is so fa

 # Currently available deprecated features

-{{#include @generated@/../../../lix/libutil/deprecated-feature-descriptions.md}}
+{{#include @generated@/contributing/deprecated-feature-descriptions.md}}
@@ -99,4 +99,4 @@ This means that experimental features and RFCs are orthogonal mechanisms, and ca

 # Currently available experimental features

-{{#include @generated@/../../../lix/libutil/experimental-feature-descriptions.md}}
+{{#include @generated@/contributing/experimental-feature-descriptions.md}}
@@ -11,19 +11,7 @@ The following instructions assume you already have some version of Nix or Lix in

 [installation instructions]: ../installation/installation.md

-A typical development flow for simple changes in Lix looks like:
- [Set up and build Lix](#building)
- For large changes, check in regarding design and possibly create an RFD issue on Forgejo
- Make the changes in your editor
- [Send the changes to Gerrit](#sending-to-gerrit)
- Once you have the number for the CL from Gerrit to put in the changelog, [write a changelog entry](#release-notes) and amend it into the commit
- Update the Gerrit change by submitting it with the same command as the first time
- Request and receive a code review
- Address feedback from the review
- Amend commits, send to Gerrit again
- Submit the approved change
-
-## Building Lix in a development shell {#building}
+## Building Lix in a development shell

 ### Setting up the development shell

@@ -51,64 +39,17 @@ $ nix-shell -A native-clangStdenvPackages

 ### Building from the development shell

-We have a [justfile](https://just.systems/) for extra convenient building.
-It defaults to using `./build` as the build directory, and `$out` (`./outputs/out`) as the install directory.
-For most cases, you can clean-build, install, and run the tests with:
-
-```bash
-$ just setup --wipe && just test
-```
-
-> **Note**
->
-> The `--wipe` argument to `meson setup` conveniently works whether you have an existing build directory or not.
->
-> However, it is *mostly*, but not *exactly* equivalent to deleting the build directory first.
-> In particular, previously specified `-D` build options are **preserved** with `--wipe` (for some reason).
-> For example, if you fetch and checkout a new version of Lix, and that new version *removes* a Meson build option from `./meson.options`, *and* a previous invocation in that build directory explicitly set that option, then `meson setup --wipe build` will error, complaining about the unknown option.
-> For these cases, `just clean` will give you a well-and-truly-this-time-for-real clean build.
-
-Because the integration tests require installation to work, `just test` automatically also calls `just install`, and Meson helpfully will automatically build any targets that need building when trying to install them.
-
-You can override the build directory or install directory by setting the justfile [variables](https://just.systems/man/en/setting-variables-from-the-command-line.html) `outdir` and `builddir` on the command-line:
-
-```bash
-$ just builddir=build-before-bisect outdir=out-before-bisect setup
-$ just builddir=build-before-bisect test
-```
-
-You'll have to set `builddir` for every target, but `outdir` only needs to be set for `setup`.
-
-You can also run the unit tests and integration tests separately:
+You can build and test Lix with just:

 ```bash
 $ just setup
-$ just test-unit
-$ just test-integration
+$ just build
+$ just test --suite=check
+$ just install
+$ just test --suite=installcheck
 ```

-Most justfile targets forward all further arguments to the underlying Meson invocation.
-For example, to work on both Lix and nix-eval-jobs you can run:
-
-```bash
-$ just setup -Dnix-eval-jobs=enabled
-```
-
-Note that only targets which *don't* accept extra arguments can have other targets following them.
-`just clean setup` is equivalent to `just clean && just setup`, but `just build test` runs the `build` target with the argument `test`.
-This means that if you want to, for example, build with lower parallelism, and then test, you will have to do something like this:
-
-```bash
-$ just build -j4
-$ just test
-```
-
-Finally, the rewrite of the integration test suite, functional2, also has its own justfile target which allows passing extra arguments to pytest.
-For example, to collect and list all functional2 tests without running them, you can pass pytest's `--collect-only` argument:
-
-```bash
-$ just test-functional2 --collect-only
-```
+(Check and installcheck may both be done after install, allowing you to omit the --suite argument entirely, but this is the order package.nix runs them in.)

 You can also build Lix manually:

@@ -161,14 +102,14 @@ $ meson compile -C build nixexpr
 All targets may be addressed as their output, relative to the build directory, e.g.:

 ```bash
-$ meson compile -C build lix/libexpr/liblixexpr.so
+$ meson compile -C build src/libexpr/liblixexpr.so
 ```

 But Meson does not consider intermediate files like object files targets.
 To build a specific object file, use Ninja directly and specify the output file relative to the build directory:

 ```bash
-$ ninja -C build lix/libexpr/liblixexpr.so.p/nixexpr.cc.o
+$ ninja -C build src/libexpr/liblixexpr.so.p/nixexpr.cc.o
 ```

 To inspect the canonical source of truth on what the state of the buildsystem configuration is, use:
@@ -177,59 +118,7 @@ To inspect the canonical source of truth on what the state of the buildsystem co
 $ meson introspect
 ```

-#### LLD
-
-The development shell on Linux uses LLD by default for faster link times.
-This is set using `mesonFlags`, so to override it, you can simplify re-specify the linker to Meson:
-
-```bash
-$ just setup -Dc_link_args=-fuse-ld=ld -Dcpp_link_args=-fuse-ld=ld
-```
-
-While using LLD, you may find it helpful to use ThinLTO for even further improvements to link times for incremental builds:
-
-```bash
-$ just setup -Db_lto=true -Db_lto_mode=thin -Db_thinlto_cache=true
-```
-
-## Sending changes to Gerrit for review {#sending-to-gerrit}
-
-We use Gerrit for all our code review in Lix.
-Our instance is at <https://gerrit.lix.systems>.
-
-There's much more information about how to use Gerrit in the [wiki section on Gerrit][wiki-gerrit] including how to use Jujutsu, how to use the UI and more.
-The Snix project also has some Gerrit information [in their contributing docs][snix-gerrit].
-
-[wiki-gerrit]: https://wiki.lix.systems/books/contributing/chapter/intro-to-gerrit
-[snix-gerrit]: https://snix.dev/docs/guides/contributing/
-
-The gist is that once you have your SSH key and git remote set up, you can send commits for review with:
-
-```
-$ git remote set-url origin ssh://YOURUSERNAME@gerrit.lix.systems:2022/lix
-$ git push origin HEAD:refs/for/main
-```
-
-Then, you can request a review via the "Reply" button on the web UI.
-If you click "Suggest Owners", it will try to suggest the maintainers of the area of the code change to send review requests to.
-Requesting reviews from multiple people is normal.
-
-We do our best to respond to directly sent reviews in a few days, so feel free to request another reviewer or ask on Matrix if you've not got a response for a while.
-Keep in mind that Lix is a volunteer project and we have limited bandwidth, so some changes aren't feasible to shepherd through; please check in on Matrix at design time when doing large changes.
-
-Once you get a `Code-Review+2` vote on your change, it's rebased on `main` and CI marks it `Verified+1`, you're able (and usually expected, so you can have a second chance to check it over) to hit the Submit button to merge it.
-If the change appears as "Rebase Required", you need to rebase it on `main` locally or via the Gerrit UI and wait for `Verified+1` before the Submit button is made active
-The `Code-Review+2` from before will stick around through trivial rebases so no need to re-request review for a mere rebase.
-
-## Interacting with the CI, Buildkite
-
-We use Buildkite for our CI, usually you will not have to interact directly with it other than reviewing any errors it produces, which are linked from Gerrit.
-
-However in certain cases a CI run will fail due to transient issues not related to your code and you will need to rerun it by hand.
-You can log in to the CI via [SSO](https://buildkite.com/sso/afnix). On your job you can then hit the "Retry failed" button to rerun it, normally you will not have a repeat of the transient issue.
-If the build still fails on CI issues or all builds are failing this should be reported via [Zulip on #T-infra](https://zulip.lix.systems/#narrow/channel/7-T-infra) or [Matrix on #dev](https://matrix.to/#/%23dev%3Alix.systems?via=lix.systems).
-
-## Building Lix with `nix`
+## Building Lix outside of development shells

 To build a release version of Lix for the current operating system and CPU architecture:

@@ -252,7 +141,6 @@ Lix can be built for various platforms, as specified in [`flake.nix`]:

 - `x86_64-linux`
 - `x86_64-darwin`
- `x86_64-freebsd`
 - `i686-linux`
 - `aarch64-linux`
 - `aarch64-darwin`
@@ -329,7 +217,7 @@ Lix uses a string with the following format to identify the *system type* or *pl

 It is set when Lix is compiled for the given system, and determined by [Meson's `host_machine.cpu_family()` and `host_machine.system()` values](https://mesonbuild.com/Reference-manual_builtin_host_machine.html).

-For historic reasons and backward-compatibility, some CPU and OS identifiers are translated from the GNU Autotools naming convention in [`meson.build`](https://git.lix.systems/lix-project/lix/src/branch/main/meson.build) as follows:
+For historic reasons and backward-compatibility, some CPU and OS identifiers are translated from the GNU Autotools naming convention in [`meson.build`](https://git.lix.systems/lix-project/lix/blob/main/meson.build) as follows:

 | `host_machine.cpu_family()`             | Nix                 |
 |----------------------------|---------------------|
@@ -356,13 +244,13 @@ To build with one of those environments, you can use
 $ nix build .#nix-ccacheStdenv
 ```

-for <a id="nix-with-flakes">flake-enabled Nix</a>, or
+for flake-enabled Nix, or

 ```console
 $ nix-build --attr nix-ccacheStdenv
 ```

-for <a id="classic-nix">classic Nix</a>.
+for classic Nix.

 You can use any of the other supported environments in place of `nix-ccacheStdenv`.

@@ -386,10 +274,10 @@ Configure your editor to use the `clangd` from the shell, either by running it i
 > Some other editors (e.g. Emacs, Vim) need a plugin to support LSP servers in general (e.g. [lsp-mode](https://github.com/emacs-lsp/lsp-mode) for Emacs and [vim-lsp](https://github.com/prabirshrestha/vim-lsp) for vim).
 > Editor-specific setup is typically opinionated, so we will not cover it here in more detail.

-# Manual and documentation
-
-## Building the manual
+### Checking links in the manual

+The build checks for broken internal links.
+This happens late in the process, so `nix build` is not suitable for iterating.
 To build the manual incrementally, run:

 ```console
@@ -401,20 +289,15 @@ meson compile -C build manual
 [`mdbook-linkcheck`]: https://github.com/Michael-F-Bryan/mdbook-linkcheck
 [URI fragments]: https://en.wikipedia.org/wiki/URI_fragment

-The built manual is in `build/doc/manual/manual/index.html`.
+#### `@docroot@` variable

-The build checks for broken internal links.
-This happens late in the process, so `nix build` is not suitable for iterating and it's recommended to use the `meson` command above instead.
+`@docroot@` provides a base path for links that occur in reusable snippets or other documentation that doesn't have a base path of its own.

-### `@\docroot\@` variable
+If a broken link occurs in a snippet that was inserted into multiple generated files in different directories, use `@docroot@` to reference the `doc/manual/src` directory.

-`@\docroot\@` provides a base path for links that occur in reusable snippets or other documentation that doesn't have a base path of its own.
-
-If a broken link occurs in a snippet that was inserted into multiple generated files in different directories, use `@\docroot\@` to reference the `doc/manual/src` directory.
-
-If the `@\docroot\@` literal appears in an error message from the `mdbook-linkcheck` tool, the `@\docroot\@` replacement needs to be applied to the generated source file that mentions it.
-See existing `@\docroot\@` logic in `doc/manual/substitute.py`.
-Regular markdown files used for the manual have a base path of their own and they can use relative paths instead of `@\docroot\@`.
+If the `@docroot@` literal appears in an error message from the `mdbook-linkcheck` tool, the `@docroot@` replacement needs to be applied to the generated source file that mentions it.
+See existing `@docroot@` logic in the [Makefile].
+Regular markdown files used for the manual have a base path of their own and they can use relative paths instead of `@docroot@`.

 ## API documentation

@@ -446,7 +329,7 @@ You can build it yourself:

 Metrics about the change in line/function coverage over time will be available in the future (FIXME(lix-hydra)).

-## Add a release note {#release-notes}
+## Add a release note

 `doc/manual/rl-next` contains release notes entries for all unreleased changes.

@@ -515,77 +398,4 @@ The following properties are supported:
 ### Build process

 Releases have a precomputed `rl-MAJOR.MINOR.md`, and no `rl-next.md`.
-Development releases have a generated `rl-next.md`.
-
-# Adding experimental or deprecated features, global settings, or builtins
-
-Experimental and deprecated features, global settings, and builtins are generally referenced both in the code and in the documentation.
-To prevent duplication or divergence, they are defined in data files, and a script generates the necessary glue.
-The data file format is similar to the release notes: it consists of a YAML metadata header, followed by the documentation in Markdown format.
-
-## Experimental or deprecated features
-
-Experimental and deprecated features support the following metadata properties:
-* `name` (required): user-facing name of the feature, to be used in `nix.conf` options and on the command line.
-  This should also be the stem of the file name (with extension `md`).
-* `internalName` (required): identifier used to refer to the feature inside the C++ code.
-
-Experimental feature data files should live in `lix/libutil/experimental-features`, and deprecated features in `lix/libutil/deprecated-features`.
-They must be listed in the `experimental_feature_definitions` or `deprecated_feature_definitions` lists in `lix/libutil/meson.build` respectively to be considered by the build system.
-
-## Global settings
-
-Global settings support the following metadata properties:
-* `name` (required): user-facing name of the setting, to be used as key in `nix.conf` and in the `--option` command line argument.
-* `internalName` (required): identifier used to refer to the setting inside the C++ code.
-* `platforms` (optional): a list specifying the platforms on which this setting is available.
-  If not specified, it is available on all platforms.
-  Valid platform names are `darwin`, `linux`.
-* `type` (optional): C++ type of the setting value.
-  This specifies the setting object type as `Setting<T>`; if more control is required, use `settingType` instead.
-* `settingType` (required if `type` is not specified): C++ type of the setting object.
-* `default` (optional): default value of the setting.
-  `null`, truth values, integers, strings and lists are supported as long as the correct YAML type is used, `type` is not taken into account).
-  Other types, machine-dependent values or non-standard representations must be handled using `defaultExpr` and `defaultText` instead.
-* `defaultExpr` (required if `default` is not specified): a string containing the C++ expression representing the default value.
-* `defaultText` (required if `default` is not specified): a string containing the Markdown expression representing the default value in the documentation.
-  Literal values are conventionally surrounded by backticks, and a system-dependent value is signaled by `*machine-specific*`.
-* `aliases` (optional): a list of secondary user-facing names under which the setting is available.
-  Defaults to empty if not specified.
-* `experimentalFeature` (optional): the user-facing name of the experimental feature which needs to be enabled to change the setting.
-  If not specified, no experimental feature is required.
-* `deprecated` (optional): whether the setting is deprecated and shown as such in the documentation for `nix.conf`.
-  Defaults to false if not specified.
-
-Settings are not collected in a single place in the source tree, so an appropriate place needs to be found for the setting to live.
-Look for related setting definition files under second-level subdirectories of `lix` whose name includes `settings`.
-Then add the new file there, and don't forget to register it in the appropriate `meson.build` file.
-
-## Builtin functions
-
-The following metadata properties are supported for builtin functions:
-* `name` (required): the language-facing name (as a member of the `builtins` attribute set) of the function.
-* `implementation` (optional): a C++ expression specifying the implementation of the builtin.
-  It must be a function of signature `Value(EvalState &, PosIdx, Value * *)`.
-  If not specified, defaults to `prim_${name}`.
-* `renameInGlobalScope` (optional): whether the definition should be "hidden" in the global scope by prefixing its name with two underscores.
-  If not specified, defaults to `true`.
-* `args` (required): list containing the names of the arguments, as shown in the documentation.
-  All arguments must be listed here since the function arity is derived as the length of this list.
-* `experimental_feature` (optional): the user-facing name of the experimental feature which needs to be enabled for the builtin function to be available.
-  If not specified, no experimental feature is required.
-
-New builtin function definition files must be added to `lix/libexpr/builtins` and registered in the `builtin_definitions` list in `lix/libexpr/meson.build`.
-
-## Builtin constants
-The following metadata properties are supported for builtin constants:
-* `name` (required): the language-facing name (as a member of the `builtins` attribute set) of the constant.
-* `type` (required): the Nix language type of the constant; the C++ type is automatically derived.
-* `constructorArgs` (optional): list of strings containing C++ expressions passed as arguments to the appropriate `Value` constructor.
-  If the value computation is more complex, `implementation` can be used instead.
-* `implementation` (required if `constructorArgs` is not specified): string containing a C++ expressing computing the value of the constant.
-* `impure` (optional): whether the constant is considered impure.
-  Impure constants are not available when pure evaluation mode is activated.
-  Defaults to `false` when not specified.
-
-New builtin constant definition files must be added to `lix/libexpr/builtin-constants` and registered in the `builtin_constant_definitions` list in `lix/libexpr/meson.build`.
+Set `buildUnreleasedNotes = true;` in `flake.nix` to build the release notes on the fly.
@@ -0,0 +1,28 @@
+# Intermediate step for experimental-feature-descriptions.md.
+# This splorks the output of generate-xp-features.nix as JSON,
+# which gets written as a directory tree below.
+experimental_feature_descriptions_md = custom_target(
+  command : nix_eval_for_docs + [
+    '--expr',
+    'import @INPUT0@ "experimental" "xp" (builtins.fromJSON (builtins.readFile @INPUT1@))',
+  ],
+  input : [
+    '../../generate-features.nix',
+    nix_exp_features_json,
+  ],
+  capture : true,
+  output : 'experimental-feature-descriptions.md',
+)
+
+deprecated_feature_descriptions_md = custom_target(
+  command : nix_eval_for_docs + [
+    '--expr',
+    'import @INPUT0@ "deprecated" "dp" (builtins.fromJSON (builtins.readFile @INPUT1@))',
+  ],
+  input : [
+    '../../generate-features.nix',
+    dp_features_json,
+  ],
+  capture : true,
+  output : 'deprecated-feature-descriptions.md',
+)
@@ -13,7 +13,7 @@ The unit tests are defined using the [googletest] and [rapidcheck] frameworks.
 >
 > ```
 > …
-> ├── lix
+> ├── src
 > │   ├── libexpr
 > │   │   ├── …
 > │   │   ├── value
@@ -46,10 +46,10 @@ The unit tests are defined using the [googletest] and [rapidcheck] frameworks.
 > …       …   …   …   …   …
 > ```

-The unit tests for each Lix library (`liblixexpr`, `liblixstore`, etc..) live inside a directory `lix/${library_shortname}/tests` within the directory for the library (`lix/${library_shortname}`).
+The unit tests for each Lix library (`liblixexpr`, `liblixstore`, etc..) live inside a directory `src/${library_shortname}/tests` within the directory for the library (`src/${library_shortname}`).

 The data is in `tests/unit/LIBNAME/data/LIBNAME`, with one subdir per library, with the same name as where the code goes.
-For example, `liblixstore` code is in `lix/libstore`, and its test data is in `tests/unit/libstore/data/libstore`.
+For example, `liblixstore` code is in `src/libstore`, and its test data is in `tests/unit/libstore/data/libstore`.
 The path to the unit test data directory is passed to the unit test executable with the environment variable `_NIX_TEST_UNIT_DATA`.

 ### Running tests
@@ -62,12 +62,6 @@ For `installcheck` specifically, first run `just install` before running the tes

 Finer-grained filtering within a test suite is also possible using the [--gtest_filter](https://google.github.io/googletest/advanced.html#running-a-subset-of-the-tests) command-line option to a test suite executable, or the `GTEST_FILTER` environment variable.

-### Inspecting failures
-
-The test suite emits logs in `build/meson-logs/`; the full textual failure logs are in `build/meson-logs/testlog.txt`.
-
-If you want a much nicer experience of viewing the logs in a structured manner, use `xunit-viewer --results build/meson-logs/testlog.junit.xml --server` to view them in a web browser.
-
 ### Unit test support libraries

 There are headers and code which are not just used to test the library in question, but also downstream libraries.
@@ -351,7 +345,7 @@ rg '(?:[^A-Za-z]|^)(_[A-Z][^-\[ }/:");$(]+)' -r '$1' --no-filename --only-matchi
 rg '\$\{?([A-Z][^-\[ }/:");]+)' -r '$1' --no-filename --only-matching tests | sort -u > vars.txt
 ```

-I grepped `lix/` for `get[eE]nv\("` to find the mentions in Lix code.
+I grepped `src/` for `get[eE]nv\("` to find the mentions in Lix code.

 ### Used by Lix testing support code

@@ -367,8 +361,8 @@ I grepped `lix/` for `get[eE]nv\("` to find the mentions in Lix code.

 - `_NIX_FORCE_HTTP` - Forces file URIs to be treated as remote ones.

-  Used by `lix/libfetchers/git.cc`, `lix/libstore/http-binary-cache-store.cc`,
-  `lix/libstore/local-binary-cache-store.cc`. Seems to be for forcing Git
+  Used by `src/libfetchers/git.cc`, `src/libstore/http-binary-cache-store.cc`,
+  `src/libstore/local-binary-cache-store.cc`. Seems to be for forcing Git
  clones of `git+file://` URLs, making the HTTP binary
  cache store accept `file://` URLs (presumably passing them to curl?), and
  unknown reasons for the local binary cache.
@@ -380,13 +374,10 @@ I grepped `lix/` for `get[eE]nv\("` to find the mentions in Lix code.
  `structuredAttrs` documentation.
 - `NIX_BIN_DIR`, `NIX_STORE_DIR` (or its inconsistently-used old alias `NIX_STORE`), `NIX_DATA_DIR`,
  `NIX_LOG_DIR`, `NIX_LOG_DIR`, `NIX_STATE_DIR`, `NIX_CONF_DIR` -
-  Overrides compile-time configuration of various locations used by Lix. See `lix/libstore/globals.cc`.
+  Overrides compile-time configuration of various locations used by Lix. See `src/libstore/globals.cc`.

  **Expected value**: a directory
- `LIX_DAEMON_SOCKET_DIR` (optional) - Overrides the daemon socket directory from `$NIX_STATE_DIR/daemon-socket`.
-
-  **Expected value**: a directory
- `NIX_DAEMON_SOCKET_PATH` (optional) - Overrides the daemon socket path from `$NIX_STATE_DIR/daemon-socket/socket`. Ignored if `LIX_DAEMON_SOCKET_DIR` is set.
+- `NIX_DAEMON_SOCKET_PATH` (optional) - Overrides the daemon socket path from `$NIX_STATE_DIR/daemon-socket/socket`.

  **Expected value**: path to a socket
 - `NIX_LOG_FD` (output) - An FD number for logs in `internal-json` format to be sent to.
@@ -404,6 +395,7 @@ I grepped `lix/` for `get[eE]nv\("` to find the mentions in Lix code.

  **Expected value**: the path to an executable shell
 - `PRINT_PATH` - Undocumented. Used by `nix-prefetch-url` as an alternative form of `--print-path`. Why???
+- `_NIX_IN_TEST` - If present with any value, makes `fetchClosure` accept file URLs in addition to HTTP ones. Why is this not `_NIX_FORCE_HTTP`??

  Not used anywhere else.
 - `NIX_ALLOW_EVAL` - Used by eval-cache tests to block evaluation if set to `0`.
@@ -457,6 +449,9 @@ I grepped `lix/` for `get[eE]nv\("` to find the mentions in Lix code.
 - `NIX_CLIENT_PACKAGE` - Runs the test suite against an alternate Nix client with the current daemon.

  **Expected value**: something like `/nix/store/...-nix-2.18.2`
+- `NIX_TESTS_CA_BY_DEFAULT` - Pass `__contentAddressed`, `outputHashMode` and `outputHashAlgo` to builds of some input-addressed derivations in the test suite.
+
+  **Expected value**: 1
 - `TEST_DATA` - Not an environment variable! This is used in repl characterization tests to refer to `tests/functional/repl_characterization/data`.
  More specifically, that path is replaced with the string `$TEST_DATA` in output for reproducibility.
 - `TEST_HOME` (output) - Set to the temporary directory that is set as `$HOME` inside the tests, underneath `$TEST_ROOT`.
@@ -41,6 +41,12 @@

  [realise]: #gloss-realise

+- [content-addressed derivation]{#gloss-content-addressed-derivation}
+
+  A derivation which has the
+  [`__contentAddressed`](./language/advanced-attributes.md#adv-attr-__contentAddressed)
+  attribute set to `true`.
+
 - [fixed-output derivation]{#gloss-fixed-output-derivation}

  A derivation which includes the
@@ -89,13 +95,13 @@

  [store path]: #gloss-store-path

- [file system object]{#gloss-file-system-object}
+- [file system object]{#gloss-store-object}

  The Nix data model for representing simplified file system data.

  See [File System Object](@docroot@/architecture/file-system-object.md) for details.

-  [file system object]: #gloss-store-path
+  [file system object]: #gloss-file-system-object

 - [store object]{#gloss-store-object}

@@ -108,13 +114,14 @@
 - [input-addressed store object]{#gloss-input-addressed-store-object}

  A store object produced by building a
+  non-[content-addressed](#gloss-content-addressed-derivation),
  non-[fixed-output](#gloss-fixed-output-derivation)
  derivation.

 - [output-addressed store object]{#gloss-output-addressed-store-object}

  A [store object] whose [store path] is determined by its contents.
-  This includes derivations and the outputs of [fixed-output derivations](#gloss-fixed-output-derivation).
+  This includes derivations, the outputs of [content-addressed derivations](#gloss-content-addressed-derivation), and the outputs of [fixed-output derivations](#gloss-fixed-output-derivation).

 - [substitute]{#gloss-substitute}

@@ -242,7 +249,7 @@
  links.  NARs are generated and unpacked using `nix-store --dump`
  and `nix-store --restore`.

- [`∅`]{#gloss-empty-set}
+- [`∅`]{#gloss-emtpy-set}

  The empty set symbol. In the context of profile history, this denotes a package is not present in a particular version of the profile.

@@ -1,6 +1,6 @@
 # Installing a Binary Distribution

-See <https://lix.systems/install/> for more details.
+See https://lix.systems/install/ for more details.

 <!--

@@ -60,10 +60,3 @@ Then:
 ```console
 $ docker run -ti lix
 ```
-
-# Known issues
-
-Lix in Docker is very sensitive to **functional** DNS resolution if you are running with [Pasta protections](../advanced-topics/pasta.md) which are enabled by default since Lix 2.93.0 on most distributions.
-If you notice failure to download things, double check whether your **first** DNS entry in `/etc/resolv.conf` is functional.
-
-Lix with [Pasta protections](../advanced-topics/pasta.md) does not support failing over the next entries.
@@ -50,6 +50,15 @@ The most current alternative to this section is to read `package.nix` and see wh
  - The `boost` library of version 1.66.0 or higher. It can be obtained
    from the official web site <https://www.boost.org/>.

+  - The `editline` library of version 1.14.0 or higher. It can be
+    obtained from the its repository
+    <https://github.com/troglobit/editline>.
+
+  - The `libsodium` library for verifying cryptographic signatures
+    of contents fetched from binary caches.
+    It can be obtained from the official web site
+    <https://libsodium.org>.
+
  - Recent versions of Bison and Flex to build the parser. (This is
    because Nix needs GLR support in Bison and reentrancy support in
    Flex.) For Bison, you need version 2.6, which can be obtained from
@@ -148,7 +148,7 @@ paths) are set.

 For example, the following command gets all dependencies of the
 Pan newsreader, as described by [its
-Nix expression](https://github.com/NixOS/nixpkgs/blob/master/pkgs/by-name/pa/pan/package.nix):
+Nix expression](https://github.com/NixOS/nixpkgs/blob/master/pkgs/applications/networking/newsreaders/pan/default.nix):

 ```console
 $ nix-shell '<nixpkgs>' --attr pan
@@ -1 +0,0 @@
-This section lists known issues around Lix.
@@ -1,21 +0,0 @@
-# Limitations of non-isolated builds
-
-## What are non-isolated builds?
-
-In Lix, only builds done on Linux with `sandbox = true` and a functioning
-`pasta-path` are isolated from the rest of the system, all other builds are
-considered non-isolated to some degree.
-
-For example, running Lix with [Pasta](@docroot@/advanced-topics/pasta.md)
-disabled makes the host network visible to fixed-output derivations, reducing
-isolation somewhat.
-
-## Clean termination of non-isolated builds
-
-Non-isolated builds may not terminate cleanly in all cases due to limitations in Lix's process management.
-
-This occurs when a build keeps the build log file descriptor open past the end of the actual build. A common cause of this are background tasks that aren't properly terminated before the main build process exits, for example: HTTP servers run as part of a test suite.
-
-See [issue #1018](https://git.lix.systems/lix-project/lix/issues/1018) for an example.
-
-The only solution is to manually terminate leftover processes in your derivation, including during failure scenarios.
@@ -209,8 +209,15 @@ Derivations can declare some infrequently used optional attributes.

  - [`__contentAddressed`]{#adv-attr-__contentAddressed}
    > **Warning**
-    > This attribute is part of a removed [experimental feature](@docroot@/contributing/experimental-features.md).
-    > Setting this flag *will* cause eval errors.
+    > This attribute is part of an [experimental feature](@docroot@/contributing/experimental-features.md).
+    >
+    > To use this attribute, you must enable the
+    > [`ca-derivations`](@docroot@/contributing/experimental-features.md#xp-feature-ca-derivations) experimental feature.
+    > For example, in [nix.conf](../command-ref/conf-file.md) you could add:
+    >
+    > ```
+    > extra-experimental-features = ca-derivations
+    > ```

    If this attribute is set to `true`, then the derivation
    outputs will be stored in a content-addressed location rather than the
@@ -254,7 +261,7 @@ Derivations can declare some infrequently used optional attributes.
    useful for very trivial derivations (such as `writeText` in Nixpkgs)
    that are cheaper to build than to substitute from a binary cache.

-    You may disable the effects of this attribute by enabling the
+    You may disable the effects of this attibute by enabling the
    `always-allow-substitutes` configuration option in Lix.

    > **Note**
@@ -302,6 +309,8 @@ Derivations can declare some infrequently used optional attributes.

    - `maxSize` defines the maximum size of the resulting [store object](../glossary.md#gloss-store-object).
    - `maxClosureSize` defines the maximum size of the output's closure.
+    - `ignoreSelfRefs` controls whether self-references should be considered when
+      checking for allowed references/requisites.

    Example:

@@ -4,7 +4,7 @@ These constants are built into the Nix language evaluator:

 <dl>

-{{#include @generated@/../../../lix/libexpr/builtin-constants.md}}
+{{#include @generated@/language/builtin-constants.md}}

 </dl>

@@ -15,6 +15,6 @@ For convenience, some built-ins can be accessed directly:
  <dd><p><var>derivation</var> is described in
         <a href="derivations.md">its own section</a>.</p></dd>

-{{#include @generated@/../../../lix/libexpr/builtins.md}}
+{{#include @generated@/language/builtins.md}}

 </dl>
@@ -17,12 +17,6 @@ the attributes of which specify the inputs of the build.
    string. This is used as a symbolic name for the package by
    `nix-env`, and it is appended to the output paths of the derivation.

-    > **Note**
-    >
-    > Names can only contain alphanumerical characters (0-9, a-z, A-Z)
-    > as well as `+`, `-`, `.`, `_`, `?` and `=`. Names must be neither
-    > `.` nor `..`, and must not start with `.-` or `..-`.
-
  - There must be an attribute named [`builder`]{#attr-builder} that identifies the
    program that is executed to perform the build. It can be either a
    derivation or a source (a local file reference, e.g.,
@@ -0,0 +1,27 @@
+builtins_md = custom_target(
+  command : nix_eval_for_docs + [
+    '--expr',
+    'import @INPUT0@ (builtins.fromJSON (builtins.readFile @INPUT1@)).builtins',
+  ],
+  capture : true,
+  input : [
+    '../../generate-builtins.nix',
+    language_json,
+  ],
+  output : 'builtins.md',
+  env : nix_env_for_docs,
+)
+
+builtin_constants_md = custom_target(
+  command : nix_eval_for_docs + [
+    '--expr',
+    'import @INPUT0@ (builtins.fromJSON (builtins.readFile @INPUT1@)).constants',
+  ],
+  capture : true,
+  input : [
+    '../../generate-builtin-constants.nix',
+    language_json,
+  ],
+  output : 'builtin-constants.md',
+  env : nix_env_for_docs,
+)
--- a/Show More
+++ b/Show More
				`@@ -1 +0,0 @@`
				`This section lists known issues around Lix.`